Product Reviews
WORLDWIDE FREE SHIPPING


Sort:
Avatar
Kilzz
Verified

VERIFIED OWNER
  • JoinedJun 2014
  • Posts 176
  • Reviews 105
  • Kudos124
Overall   (4.7)
› Quality
› Value
PROS
The Price! Easy access to the build deck. Easy to build. Juice flow control. Top fill. Flavor for days.
CONS
Only one air flow insert (subjective) Narrow 510 drip tip hole.
This tank had its little issues. The triangle that controls the juice flow was loose, it has those allen grub screws I hate, and its glass is known to easily break. But all those things are easily fixed. Use a 5mm allen wrench to tighten the juice flow, replace the grub screws for slotten ones I always have on hand, and order the pei replacement tank.
I never buy the latest and greatest, I wait for the price to come down. I usually order at the beginning of the month, and was all set to order this one, and the price dropped. So into the cart is went with the pei tank.
The machining is ok, its not polished like the genuine ones are. But you get a good tank and if you have a dremel and some polishing bits you can make it just as nice.
The outstanding flavor this tank gives is worth any little fixable flaws. The 2.0 insert is perfect for the loose mtl I like. The top fill is very convenient. I may just order another.
Reviewed on
Avatar
djvillan
Verified

VERIFIED OWNER
Overall   (3.5)
› Quality
› Value
This is my fifth Skyline R rta but my first SXK version. It doesn't come with a spare glass tank, a second mtl drip tip or spare airdisks but for the price it's ok. Machining is average compared to the Ulton and WejoyTech clones, the triangular shaped juice flow control piece is very sharp and the threads on the top cap are a bit rough, the peek insulator is raised higher than the deck rather than being flush with it. The o-ring tolerances are average and the glass is very thin, like the authentic and all of the other clones. I've never had one break on me but just in case I have almost a dozen spares.
Reviewed on
JGsaws
Verified

VERIFIED OWNER
  • JoinedApr 2019
  • Posts 22
  • Reviews 256
  • Kudos3
Overall   (4.7)
› Quality
› Value
PROS
flavor logos deck Price
CONS
jfc sharp edges crunchy threads no inserts
The glass tank is very thin buy the PEI tank trust me, and the top cap threads are a bit crunchy to begin with but after more than few times of screwing it on and off the threads are now smooth I have the ULTON did the same thing. The juice control is very sharp! feels like it will cut fingers when unscrewing fill, and with the short drip tip cut your lip if you get bumped. I took the control pyramid off put in a vice between thin rubber (so as not to damage it) and used a fine file to take the edges off just enough to take blades off fixed! did the same on ULTON. The flavor is top notch perfect throat hit using 1.0mm insert, juice control works flawless. Building and wicking is simple use a little more cotton than normal never leaks, inserts can be changed without disturbing your build I really enjoy using this tank has its flaws but cant put it down.
Reviewed on
Avatar
carrion4worm
Verified

VERIFIED OWNER
  • JoinedAug 2017
  • Posts 4842
  • Reviews 282
  • Kudos2896
Overall   (4.2)
› Quality
› Value
PROS
nice all around effort from SXK good O-rings and dimensions clever design choices good flavor and capacity 1 to 1, logos
CONS
No DTL drip tip included Only 1 AF Insert (2.0mm) Wonky, but effective JFC
I've been vaping this for three days straight now, and also vaping the original Skyline simultaneously ---
They vape similar, though V2 offers "quality of life" improvements that will excite or bore you, depending on expectations. mine were perhaps initially too high, and I was slightly let down upon first vape, but as my time with this RTA has increased, I've grown to like it more and more. The deck is simple two post, and I've had 3 wire claptons, and 5 wire braids installed. Your wicking needs to be thinned if using normal 70/30 juice...if your vape is dry, remove some wicking! the quick release tank section makes this RTA great for on the fly alterations...hell, you can change out the air insert as well! This is the best use I've seen of the "removable tank" system -- it's stable and solid while being easy to remove and replace. I felt my JFC was a little loose, and could be moved too easily. Luckily, extra O-rings included a perfect replacement that tightened things up, making the JFC much firmer. The laser engravings are exact, and there is a pseudo validation number etched around the circumference of the deck. The atty looks great overall, though it can appear "off" from certain perspectives, due to the triangular top cap.

Other later brands include a wider bore DL drip tip...no luck with SXK's earlier offering. Mine has a slightly undersized 510 drip tip opening, so that could be a problem for some, but I'd get this if you loved the first Skyline....it's a worthy successor.
Reviewed on