Product Reviews
WORLDWIDE FREE SHIPPING


Sort:
Avatar
AlienGrey
Verified

VERIFIED OWNER
  • JoinedFeb 2015
  • Posts 884
  • Reviews 73
  • Kudos645
Overall   (4.5)
› Quality
› Value
PROS
Flavour Silent Adjustable airflow Large build deck
CONS
Finding a different Drip Tip
The Sine Styled MTL RTA is a nice cross between the KF Prime and the DVARW MTL. It has a large build deck that looks like the build deck from the DVARW MTL but the posts look like from a KF Prime. That makes it easier to use large or more exotic coils. These posts work well with thick wire but with 27 AWG or smaller wire it can be a bit fiddling sometimes to trap the wire under the screw.
The flavour and throat hit are very good. Adjusting the airflow with the airflow disc works very good and it's silent no matter if you use 4, 3, 2, or only one 1.5mm airflow hole. The tool less airflow inserts are nice but it isn't as easy to replace them without removing the coil or wick like the DVARW MTL. Top fill is nice and there's no leaking or gurgling after a re-fill.
It's just a great MTL RTA tha tvery one should have in his collection.
Reviewed on
Baryua
Verified

VERIFIED OWNER
  • JoinedSep 2017
  • Posts 13
  • Reviews 56
  • Kudos8
Overall   (4.7)
› Quality
› Value
PROS
+ amazing MTL experience + proper MTL narrow airflow + smooth, quiet airflow + amazing flavor + 3 airflow inserts + additional airflow control valve + great wicking + no leaking + good capacity + overall build quality + no logos (proper cloning)
CONS
- uncomfortable drip tip (subjectively) - little gap between tank and top cap - tank often spins while screwing/unscrewing top cap - some liquid collected near filling ports is squeezed outside while screwing down top cap
It is like upgraded Dvarw RTA but to be honest... it is not better. Airflow control is present but... airflow is very narrow (too narrow for me) even with biggest insert and valve full open. I was happy to see filling from top but... most of cons are from this top filling. Overall it is great MTL RTA if you like very narrow airflow.
Reviewed on
adrijcke
Verified

VERIFIED OWNER
  • JoinedNov 2018
  • Posts 0
  • Reviews 1
  • Kudos0
Overall   (3.0)
› Quality
› Value
PROS
Flavour is good. Leakproof. Screw on airflow reducers. Good coil mounting posts and screws.
CONS
Machining is not great. O-ring groove on fill cap too loose. O-ring that hold tank section could be tighter.
After using the dvarw for about 2 years non stop i thought this design was even better, and it could have been. But its not :P

It still beats the berserkers, purity, ammit mtl.
Its nearly on par with the merlin nano, which is my 2nd best for me!

I like the screw on airflow reducers under the coil better than the dvarw's, because its less prone to having juice find its way out of the chamber.

Very good peek insulators on the deck, no leaks!

The juice feed holes are smaller and lower than V2 dvarw, which makes it no longer suitable to use the wick trough hole style wicking. (most saturated vape imo)

Chamber is bigger in diameter and height than dvarw, making it a cooler vape.

All be it a very decent atty, but it wont replace the dvarw as a daily.



Reviewed on
AshF1
Verified

VERIFIED OWNER
  • JoinedMar 2016
  • Posts 187
  • Reviews 301
  • Kudos77
Overall   (4.5)
› Quality
› Value
PROS
Nice machining Smooth air flow AFC works
CONS
None
This is an upgraded Dvarw but strictly for MTL vapers. Highly recommended
Reviewed on
Bineva17
Verified

VERIFIED OWNER
  • JoinedJun 2013
  • Posts 222
  • Reviews 63
  • Kudos92
Overall   (4.5)
› Quality
› Value
PROS
- It should work like a legendary Dvarw - Bottom airflow adjustable - Top fill
CONS
- Wick hold is slightly smaller, not perfect for heavy VG juice flowing (95% VG) and slightly harder to wick - Bottom airflow is not that effective. No matter how many times you adjust it, it will not give the perfect draw like the Dvarw does. - Biggest problem: All bottom air holes are too small, have to put it out for a free draw and depend on the not-that-effective bottom airflow because I don't have a drill machine - The top refilling sounds good but actually I feel easier to squeeze the Dvarw for filling than this - I'd prefer the classic look of a Dvarw
Well, I did really expect this is a better version of a Dvarw but it's not.
Reviewed on
FTBuyer2013
Verified

VERIFIED OWNER
  • JoinedJul 2019
  • Posts 45
  • Reviews 9
  • Kudos38
Overall   (3.7)
› Quality
› Value
Pros:
1. The airflow is acceptably quiet - no whistling or harmonics
2. Easy enough to build and wick - nothing complex here.
3. Sleek design without gimmicks.

Cons:
1. Drip tip aperture is too large
2. Airflow control at base can alter itself when attaching to a flat topped device/using a spacer
3. O-ring in cap can dislodge itself and fall out
4. Threading on refill cap is too long - not necessary (although it IS at the central column rather than around the circumference of the whole cap)
5. Too many parts, reminiscent of the early Taifun - IMO uneccessary overdesign/hard to clean out properly.
6. Bottom airflow allows condensate and seepage to collect in the base over time.

It works acceptably well but is a bit of a nuisance with regard to maintenance/cleaning/refilling.
Reviewed on
Tony215
Verified

VERIFIED OWNER
  • JoinedMar 2020
  • Posts 424
  • Reviews 11
  • Kudos105
Overall   (5.0)
› Quality
› Value
PROS
Build quality Smooth,innovative airflow Removable chamber piece (like the Dvarw) Fast wicking Good as MTL or RDL
CONS
No clone brand name No branding (to some) Tank is plastic, not glass Overdone number of threads on the top cap..
This thing is great.. a huge surprise to me.. similar deck design to the Dvarw.. with an interesting airflow system.. i bought this on a whim cause it's cheap and someone on here was saying how good it was but they wanted something new.. I had never heard of it prior to that.. a great find!
Reviewed on
Quimsaba
Verified

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 12
  • Reviews 207
  • Kudos3
Overall   (4.5)
› Quality
› Value
PROS
Poco ruidoso ,fácil de montar
CONS
No
Buen mtl rta por el precio que tiene.
Reviewed on
raka71
Verified

VERIFIED OWNER
  • JoinedMar 2016
  • Posts 2
  • Reviews 13
  • Kudos3
Overall   (5.0)
› Quality
› Value
PROS
machining, flavour, airflow inserts, easy to build
CONS
no
I am thrilled how good is this atomizer, and cheap. The machining is excellent, it gives a very good flavour. There are a lot of possibilities for airflow control with those three inserts.
Reviewed on
ncctom
Verified

VERIFIED OWNER
  • JoinedMar 2014
  • Posts 3
  • Reviews 14
  • Kudos1
Overall   (4.0)
› Quality
› Value
PROS
good machining
CONS
no liquidcontrol-you better dont use the topfill
install the coil an Cotton is more than easy due to the fact of two part chamber
Reviewed on