shopping cart empty
Product Reviews
WORLDWIDE FREE SHIPPING


Sort:
cHooBeyDoo
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 6
  • Reviews 7
  • Kudos1
Overall   (4.2)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Looks & feels great Very comfortable to hold VW, VV, NI, TI & SS modes Easy to use menu Uses 18650 batteries Able to use as a passthrough whilst charging. Talos compaible with Kanger Subtank Coils & RBA
CONS
Quite heavy, not a pocket mod No allen key supplied (for the 510 plate) No RBA included Battery lid screw is quite fiddly if you have large fingers
In the box you get the mod, Talos tank, USB charging lead and some spare o-rings for the tank, but there was no allen key for the 510 plate.

The mod tops out at 60 watts, with the usual 300°C, 600°F in TC mode.
VW, VV (says in the kit description not VV but is in the menu selection), NI, TI & SS modes.
Screen navigation is a breeze and easy to use:
5 clicks on, 5 clicks off,
3 clicks of the power button to select the power mode you want,
Click the up + and down - buttons at the same time to lock the power in VW mode, and to set the resistance in TC mode,
Click the up + and power button to select left or right screen mode.

Although i've not actually used the Talos tank yet, it does come with a 0.5ohm Smoant clapton coil but no RBA section -- No Smoant coils or RBA section available on FT at the time of writing this review. It is backwards compatible with the Kanger Subtank coils and RBA section but I will say if you use the RBA section or the older square Kanger coils you will loose some of the tanks capacity. My Kanger Subtank fits the mod well

The material of the mod is zinc alloy and a baked ceramic, so just to point out that the mod really is quite heavy and isn't suited as a pocket mod, but is really comfortable to hold by no means!
The silicone battery lid cover fits nice and snug but the lid screw itself is quite small so if you have large fingers you may find it a pain to unscrew.
You can charge it via USB lead and also use it as a passthrough whilst charging.
Reviewed on Was this review helpful to you? Yes / No
skooter8
Member

VERIFIED OWNER
  • JoinedDec 2015
  • Posts 8
  • Reviews 17
  • Kudos0
Overall   (4.0)
› Quality
› Value
PROS
Looks & feels great
CONS
so heavy
Looks & feels great but so heavy
Reviewed on Was this review helpful to you? Yes / No
Dreadnought
Member

VERIFIED OWNER
  • JoinedDec 2014
  • Posts 3
  • Reviews 39
  • Kudos0
Overall   (5.0)
› Quality
› Value
PROS
Excellent build quality Very easy to read screen Very responsive buttons Easy to use TC works really well Really ergonomic
CONS
Quite heavy Changing the battery is a little tiresome Clearomizer is nothing to write home about
This kit is my auto birthday present. If you love the Xvostick by Xels, this is something like a V2 more or less. Is quite heavy, I warn you, but it's not cumbersome to use. Build quality is perfect and the paint job is quite good and resistant to everyday use, even if you carry it inside your trouser pocket. Ok, it's not a mod for very high wattage vaping but for most of us, that is more than enough.
One thing you have to bear in mind is that it can hold only 22-23 mm diameter attys and no, you cant use the Uwell Crown with it, sorry.
AS for the tank, is something like a Kanger Subtank Mini. It's not bad bud also not really good nowadays.
Reviewed on Was this review helpful to you? Yes / No
Avatar
kental61
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 466
  • Reviews 71
  • Kudos249
Overall   (5.0)
› Quality
› Value
Solid mod auto recognises the ohms of the tank very much like the EVOSTICK but heavier had for a week now no problems .
Reviewed on Was this review helpful to you? Yes / No