Product Reviews
WORLDWIDE FREE SHIPPING
100-pack


Sort:
PinoyBoy
Verified

VERIFIED OWNER
  • JoinedApr 2013
  • Posts 1971
  • Reviews 114
  • Kudos2467
Overall   (5.0)
› Quality
› Value
PROS
- Cheap - all have a 1.48 to 1.5 ohm resistance - Dual coils with these will be so easy
CONS
- Thin wire snaps very easily - Weld spot snaps easily - I received 96 of these instead of 100
It is very good price for a pack. I only use drippers, and these can be used with them. Just ignore the posts if they say NR-R-NR wires are bad/useless/no-good/not for dripping atomizers. The only down side is that this thing way too thin. If you over tighten the screws, these things will snap. I'm used to the 28 and 30 ga kanthal wires, and those do not have this problem. The weld spot on some of them look very weak. Oh, count them twice since you might have gotten short handed instead of getting 100 of these; the wire used to wrap the bundle together is also a NR-R-NR wire.
Reviewed on
Avatar
usef09
Verified

VERIFIED OWNER
  • JoinedMar 2015
  • Posts 28
  • Reviews 78
  • Kudos3
Overall   (4.7)
› Quality
› Value


I bought these to use with my Minifit and they work great.
Reviewed on
Fivguy
Verified

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 54
  • Reviews 27
  • Kudos24
Overall   (5.0)
› Quality
› Value
PROS
Welds look clean Wire performs Resistance checks out at ~1.5ohm per wire Easy to work with
I purchased these several months prior to the writing of this review. My order was delayed and my chosen shipping method meant it ended up taking a little over three months for the order to arrive. In that time, I fully moved on from the old "Protank" style coilheads and into more of a subohm tank and rebuildable area of the vaping hobby. So now I'm stuck with a bag of 100 NR-R-NR wires with too high of a resistance to be used in any of my current kit. I decided to tear down a worn out Kangertech Subtank 0.5ohm head. I ended up taking two of these 1.5ohm NR-R-NR wires, wrapping them in parallel around a 2.5mm rod. Slightly spaced for the coils and none of them overlapping. I carefully fed the wire, leads first, through the top opening of the coilhead. I put a 2.5mm rod through the juice flow holes on the side of the head to hold the coil in place and secured the leads at the bottom the same as you would a Protank head. Make sure your two leads on either side are kept together and secure them with the silicone (plastic, rubber - whatever it is...) gasket and then the metal pin in the bottom of the coilhead. This two-strand parallel coil reads 0.77ohms and fires comfortably at 18 watts in the Subtank. Is it perfect? No. But it works. 5 cents of wire and organic cotton plus about 5 minutes to tear out the old coil, wrap and install and wick the new coil. I think it's worth it.
Reviewed on
Persogermania
Forum Restricted

VERIFIED OWNER
  • JoinedJun 2013
  • Posts 243
  • Reviews 208
  • Kudos24
Overall   (4.7)
› Quality
› Value
PROS
Easy to use. Easy to use. I have my BBC heads repaired it.
I have long wished for such a thing! Good that there is this winding wires (N.R.N).
My BBC-coils have dropped letze time and had leak. hereby have new wick and wrapped in my custom.
Reviewed on
PostHoler
Verified

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 55
  • Reviews 32
  • Kudos21
Overall   (5.0)
› Quality
› Value
Got these to bring some old protanks back to life, They work great..
Reviewed on
mykedj123
Verified

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 22
  • Reviews 190
  • Kudos21
Overall   (5.0)
› Quality
› Value
PROS
- Good quality
I use it to rebuild my protank and eVod heads. Work very well.
Reviewed on
PhilC
Verified

VERIFIED OWNER
  • JoinedJun 2015
  • Posts 120
  • Reviews 37
  • Kudos28
Overall   (4.7)
› Quality
› Value
PROS
Fairly strong soldered legs Quality wire Amazing results
CONS
Never get 1.5 ohm on a build once in device Some break about 1 in 10 ratio
I have to say I ordered these as a shot in the dark to test various types of NR-R-NR wire for the purpose of rebuilding STOCK atty's and these fit the bill - I was looking to rebuild the Nautilus AIO Nic Salt coils and man these are spot on albeit never 1.5 ohms but I was aiming for 1.6-1.8 ohms the closest I got has been 1.7 ohms but there are so many factors that can effect the final outcome the max I get is 2.1 ohms but they still work well and as they are Nichrome they are the same wire as the in packet stock coils.
Amazing results and high quality - RECOMMEND DEFO
Reviewed on
Avatar
DanTo
Verified

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 1031
  • Reviews 225
  • Kudos800
Overall   (4.0)
› Quality
› Value
Resistance is always spot on.
Reviewed on
jaurelioperez
Verified

VERIFIED OWNER
  • JoinedOct 2013
  • Posts 5
  • Reviews 59
  • Kudos3
Overall   (5.0)
› Quality
› Value
Una magnífica solución para no complicarse la vida. Poder acercar o alejar la resitencia del poste sin aumentar la logitud de la parte resisitiva es fantástico.
Reviewed on
The4thpower3
Verified

VERIFIED OWNER
  • JoinedJul 2013
  • Posts 536
  • Reviews 125
  • Kudos1244
Overall   (5.0)
› Quality
› Value
PROS
makes rebuilding ithaka, oddy, protank style easy
CONS
little short for ithaka but works; pull a little too hard and make break the join
good quality and low cost.
the only thing that beats these are the pre-made mirco coil versions SKU: 1591703
the premade coils are twice the cost but worth the $2.40 (extra).
Reviewed on