shopping cart empty
Product Reviews
WORLDWIDE FREE SHIPPING


Sort:
will_manners
Member

VERIFIED OWNER
  • JoinedJul 2013
  • Posts 15
  • Reviews 8
  • Kudos4
Overall   (4.5)
› Quality
› Value
3 of 3 people found the following review helpful
PROS
Cheap Customizable modes Does not overheat over prolonged usage Low battery voltage warning Reverse polarity protection.
CONS
Crap wires PWM very noticeable on Med and low
This driver is awesome value for the price. The stated specs for Med and Low are very accurate. Whilst driving an XML emitter my multimeter read 1050ma current on high, 290ma on Med and 45ma on low, which is almost directly inline with the stated 30% and 5% outputs on Med and low respectively. Overheating is also a non issue with this driver. After being left on for 10 minutes on high (without heatsinking) the driver was only body temperature at best.

Soldering joints are very good however the wires that come with it are very crap and they fell off shortly after arriving. But this does not really matter since you should replace the wires with better silicone wires anyway.

The main downside to this driver is that it is not constant current on Med and Low mode and thus PWM is very noticeable on these modes. There is mode memory in a sense, however the mode memory consists of the driver switching to the next mode that it was last switched on from. For example if you turned the driver off whilst it was in high mode the driver would switch to SOS once it was turned back on (or whatever mode was next after the previous mode).

Whilst this driver is intended for LED's the reason I bought it is to use in a 635nm Mitsubishi P73 laser build and the driver works flawlessly for my purposes. The reason that this driver works with a P73 laser diode is that the operating voltage (vf) is very similar to LED's.

Overall this is a very solid and reliable driver that performs excellent for its intended purpose and also for its non intended purpose ;)

I highly recommend it.
Reviewed on Was this review helpful to you? Yes / No
ts989
Member

VERIFIED OWNER
  • JoinedOct 2018
  • Posts 0
  • Reviews 21
  • Kudos0
Overall   (5.0)
› Quality
› Value
PROS
single sided multiple mode groups memory function
CONS
-
Great driver when you need a single sided driver for your project.
Reviewed on Was this review helpful to you? Yes / No
pahach
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 1
  • Reviews 30
  • Kudos0
Overall   (5.0)
› Quality
› Value
Отличный драйвер.Возможность менять режимы.
Reviewed on Was this review helpful to you? Yes / No
rusl.novi
Member

VERIFIED OWNER
  • JoinedJul 2014
  • Posts 0
  • Reviews 13
  • Kudos0
Overall   (5.0)
› Quality
› Value
PROS
Народный линейник для Cree Q5
CONS
Нет
Неплохой драйвер с возможностью выбора режимов. Запаял 4 звезду, оставил максимальный-минимальный. Ставил в дешевый фонарь для работы, старый драйвер с мигалками выкинул.
Reviewed on Was this review helpful to you? Yes / No
adrianca
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 10
  • Reviews 118
  • Kudos1
Overall   (5.0)
› Quality
› Value
PROS
bien de bien
CONS
no tiene
Cumple su funcion, en su totalidad a buen precio
Reviewed on Was this review helpful to you? Yes / No
X_Lost
Member

VERIFIED OWNER
  • JoinedJun 2016
  • Posts 0
  • Reviews 1
  • Kudos0
Overall   (5.0)
› Quality
› Value
Thanks! Your goods very good! I will recommend him to all friends!
Reviewed on Was this review helpful to you? Yes / No
Super_DJ
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 0
  • Reviews 6
  • Kudos0
Overall   (5.0)
› Quality
› Value
PROS
Все по честному, сколько указано - столько и выдает.
CONS
Диаметр платки около 17.1
Очень добротный драйвер. Жаль что нет пружинки, хорошо что было откуда переставить. Размер немного больше указанного - от этого долго и нудно пришлось допиливать его надфилем. В остальном - все как в спецификации.
Reviewed on Was this review helpful to you? Yes / No
lukasz.jot
Member

VERIFIED OWNER
  • JoinedNov 2015
  • Posts 4
  • Reviews 36
  • Kudos2
Overall   (4.5)
› Quality
› Value
PROS
-nice soldering quality, -well-known design, AMC7135 and Attiny 13 based, -good modes selection with stars, -a lot of firmware packages available online.
CONS
-no contact spring in the package (most of 6* or 8* AMC include nice firm spring).
Good driver both as a replacement and to build your own flashlight. Due to customizable modes it can be used in different applications. I use one of mine in a head mounted flashlight and another one in a desk LED lamp. Can always add an AMC regulator (on top of the existing one, possible in most flashlight hosts) or remove it to adjust the current capability to your needs.
Would be 10/10 if it incororated thermal protection, but you'll need to exchange i.e. for tiny45 for that.
Very good overall value anyways.
Reviewed on Was this review helpful to you? Yes / No
andyz
Member

VERIFIED OWNER
  • JoinedJan 2013
  • Posts 3
  • Reviews 77
  • Kudos2
Overall   (4.5)
› Quality
› Value
PROS
Well done Silicone wires
Economical option of well-known Nanjg family, can run up to 2,5 hours
on standard 2600 mAh battery.

Reviewed on Was this review helpful to you? Yes / No
Foxsernik
Member

VERIFIED OWNER
  • JoinedOct 2014
  • Posts 0
  • Reviews 8
  • Kudos0
Overall   (4.0)
› Quality
› Value
PROS
You can change modes by removing flashing
CONS
the first driver I bought was not working
Total was ordered 5 drivers. The first did not come to work. The remaining four drivers operate. A good driver. You can remove flashing.
Reviewed on Was this review helpful to you? Yes / No