| Classification |
|
Product Type
|
LED Drivers
|
| Electronic Components |
|
Output Current
|
5000 mA
|
| Manufacturer |
|
Brand
|
Convoy
|
| Package |
|
Package Type
|
OEM
|
|
Package Contents
|
1*LED Driver
|
| Dimensions us | metric |
|
Depth
|
10 mm
|
|
Height
|
22 mm
|
|
Width
|
22 mm
|
|
Diameter
|
22 mm
|
|
Product Weight
|
6.44 g
|
| FastTech |
| SKU |
9750871
|
| DATE LISTED |
1/21/2022
|
|
Details:
- Works with: SKU9749308, SKU9749309, SKU9749310, SKU9749311, SKU9749312, SKU9749313, SKU9749314, SKU9749315
- Driver instructions:
- Click to start up, enter the
brightness before the last shutdown, long press the switch to enter
stepless dimming (brightness increase), release the switch and long
press the switch again to enter stepless dimming (brightness decrease).
When the stepless dimming range (1-100%) reaches the maximum or minimum,
it flashes to indicate the maximum or minimum brightness. The
brightness of the flashlight can be memorized after releasing the
switch.
- When the driving temperature reaches 55 degrees, the
brightness starts to decrease slowly, and the flashlight will use the
reduced brightness as the benchmark, and the reduced brightness will be
used for the next startup.
- Press and hold for 0.5 seconds to
ultra-low brightness 0.01A (0.2%) in the shutdown state, and click to
shut down. If long-press, there will be no response (ultra-low
brightness will not be memorized).
- Double-click in any state to
reach 100% extremely bright (the extremely bright at this time belongs
to the part of stepless dimming, click to shut down, and long press for
stepless dimming. With memory)
- In the shutdown state, click the
switch 3 times to enter the burst flash (50% brightness progress)
without memory function, click the switch one time to return to the
original state. If long press, no response will be made.
- In the
shutdown state, click the switch 4 times to enter the tactical momentary
on mode. At this time, there is only one gear 100%. Press the switch to
directly turn on the extremely bright 100%, and let go to turn off the
light. 4 click to exit the tactical mode. The tactical mode also has
temperature control,
- In any state, press the switch 5 times and
voltage indicator flashes at 1% brightness (count the number of LED
flashes, corresponding to the voltage. For example, the LED flashing
***pause******* means that the voltage is 3.7V. Click to return to the
original state.
- In the shutdown state, click the switch 6 times,
the stepless dimming will switch to the conventional four-gear mode
(1%-10%-30%-100%), click the switch, and long press the switch to change
gears. To switch back to stepless dimming, just click the switch 6
times after shutting down.
- In the shutdown state, click the
switch 10 times to enter the locked state. The light flashes twice at 1%
brightness to indicate that it is locked. In the locked state, no
matter long press, short press or double tap, it will flash once to
indicate that it is in the locked state. The lock can be unlocked with
another 10 clicks. Note that this is the only unlocking method.
Considering that the flashlight will be accidentally unlocked due to the
special situation that the positive electrode of the battery will be
separated from the driving copper column and the power will be cut off
due to the violent vibration. The flashlight can not be unlocked by
manually loosening the tail cover and removing the battery.
- Low
voltage protection function: when the voltage is lower than 3V, the
stepless dimming and gear mode will automatically jump to 1% to work,
except for ultra-low light. But it can also be dimmed. If it continues
to be below 3V, it will jump back to 1%. It will shut down automatically
when it is lower than 2.8V.
Questions?
We'd love to help! Contact Customer Advocates.
Return for refund within: 45 days (details)
Return for replacement within: 6 months (details)
No restocking fee. Shipping charges may apply if returns are not results of FastTech's error.
Payments are securely processed by PayPal:
|