shopping cart empty
All mesh genesis left at Fasttech
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#1 (permalink)      1/19/2021 5:01:07 AM US Central   quote/reply + tips
CalMN
Member
  • JoinedDec 2013
  • Posts 64
  • Reviews 0
  • Kudos18
All mesh genesis left at Fasttech
Hi guys,
I'm relatively new to mesh and I was wondering what genesis atomizer are still available here on Fasttech.
I've found these so far:

YFTK In'Ax V5 Styled RTA
SKU 9719361

ST Rocket Styled RTA
SKU 9647242

YFTK NextEra Styled BF RTA
SKU 8513400

ParavozZ Ghost V2 Styled RDTA
SS SKU 9726669
Titanium SKU 9726670

YFTK ParavozZ k5k Styled RDTA
Titanium SKU 9725087

Do you know some other atom?
#2 (permalink)      1/19/2021 12:08:53 PM US Central   quote/reply + tips
PinoyBoy
Member
  • JoinedApr 2013
  • Posts 1968
  • Reviews 114
  • Kudos2462
Currently "sold out" SKU 2217000 in my experience, sold out items will rarely go back in stock.

SKU 9735338 - not a flanged cartomizer so it won't work with my old cartotanks, but I might buy just in case I find a tank to go with it.
https://www.fasttech.com/category/1/new-products
#3 (permalink)      1/19/2021 3:11:11 PM US Central   quote/reply + tips
essellar
Member
  • JoinedSep 2016
  • Posts 2178
  • Reviews 0
  • Kudos1876
Most cartomizers aren't flanged cartomizers either. The In'ax should work in your carto tanks.
#4 (permalink)      1/20/2021 4:38:10 AM US Central   quote/reply + tips
Load64
Member
  • JoinedFeb 2016
  • Posts 15
  • Reviews 3
  • Kudos6
Also, you can build a genesis mesh on most of rda with a bit of cotton in the reserve. You can do the same with some rta...

I'm using genesis mesh on this :
Fev VS SKU 9727246
YFTK Flash V4.5 SKU 9641559
Fire Bird SKU 3994801
Origen Little SKU 9653639
#5 (permalink)      1/20/2021 6:28:27 AM US Central   quote/reply + tips
CalMN
Member
  • JoinedDec 2013
  • Posts 64
  • Reviews 0
  • Kudos18
Cool, I knew about building an rda/rta/rdta with mesh but I haven't tried it yet.
Anyway, we've got available only the genesis I've put in the first post?
Probably I'm like two years late for genesis, I've missed all the sat22, nextgen, nextasis, nextiny, in'ax and I don't even know what else...
#6 (permalink)      1/20/2021 7:01:34 AM US Central   quote/reply + tips
essellar
Member
  • JoinedSep 2016
  • Posts 2178
  • Reviews 0
  • Kudos1876
+1 details
You may be able to find a Smok RSST out there for next to nothing. It was never expensive, but it was really quite a respectable "classic" genisis atty. Not "wrap your coil wires around two silver wires" classic - it has the usual "screw at the bottom, nuts on the centre post" arrangement for fixing your coil wire - but it wasn't far off the best available at the time, and cost a metric craptonne less than most of them.

And if you have (or are looking at) a boro tank device, there are two other genny bridges as well. The BBGen SKU 9725344 is basically a Nextasis without its own tank, and the (Vapeasy) Grizzly (you'll need to look at other vendors, but since the cloner is Vapeasy, it'll be cheap) manages to put a "classic" genny deck into a boro bridge.
#7 (permalink)      1/21/2021 2:35:20 AM US Central   quote/reply + tips
CalMN
Member
  • JoinedDec 2013
  • Posts 64
  • Reviews 0
  • Kudos18
Thanks for the advice on the smok rsst, it seems like an old classic genny, maybe I'll buy it. Unfortunately I don't have any billet box but it's okay, it's good to have some mesh options for this system too.
#8 (permalink)      1/21/2021 4:28:40 AM US Central   quote/reply + tips
Avatar
djvillan
Member
+1 details
BF-99 Cube

https://www.fasttech.com/category/0/search/-/p/0?f=-&keywords=bf-99+cube&sort=p1
https://www.youtube.com/watch?v=bgPDW0ZpgJU
#9 (permalink)      1/21/2021 8:33:41 AM US Central   quote/reply + tips
essellar
Member
  • JoinedSep 2016
  • Posts 2178
  • Reviews 0
  • Kudos1876
djvillan wrote:

BF-99 Cube


While masochists with too much time on their hands could conceivably put a reasonable U-coil build into that, it's more of a horizontal-coil RDTA that would be much better suited to cotton/rayon through the coil. (Mesh wick tubes into the tank would be great, though.) And since U-coils really suck if you're not rolling the mesh on the bias, especially if you have to make a hard transition from vertical to horizontal in a small chamber with a low ceiling, you'd need to source larger sheets or rolls elsewhere (EBay, Amazon, local yacht chandler, etc.) - nothing here will let you get a large enough piece when you orient the wires at 45 degrees.

#10 (permalink)      1/22/2021 10:08:06 PM US Central   quote/reply + tips
Avatar
DanTo
Member
  • JoinedJan 2014
  • Posts 1009
  • Reviews 225
  • Kudos787
SKU 7896400 (bottom feeder?)

SKU 6274100 (triple)

SKU 2830900 (kind of)

SKU 7349700, SKU 7349701 (kind of)

Edited on 1/22/2021 at 10:09 PM. Reason:
#11 (permalink)      1/23/2021 1:22:19 AM US Central   quote/reply + tips
CalMN
Member
  • JoinedDec 2013
  • Posts 64
  • Reviews 0
  • Kudos18
Yes, the spider is bottom feeder, and is a good proper mtl atom.
I wasn't aware of the other ones though, except for the nectar which is more suitable for cotton (same story as the bf-99).