If you were to keep only 3 RTA’s....
Login to post a new topic and to write a reply.
Thread Tools


Search within thread:

Rate This Thread
Login to rate this thread.
#51 (permalink)      1/2/2021 3:42:32 AM US Central   quote/reply + tips
essellar
Verified
  • JoinedSep 2016
  • Posts 2311
  • Reviews 0
  • Kudos2025
+1 details
vapeluvr wrote:

Hiko9 wrote:
three 14mm diameter RDAs.

Which ones?


It's a pretty safe bet that one of them will be SKU 9635984.

(Discontinued, unfortunately. I bought a whole passle of them for DIY testers/samplers, but they also make great MTL squonkers provided you actually remember to squonk. Great flavour, not a whole lot of capacity. Well, that's not entirely fair. If you're running it at very low power - like really old-school - you can get about "a smoke's worth" out of a fill. With a tiny 14mm battery, be it a little rectangle like the Eleaf Basal or Demon Killer Tiny, or an eGo/EVOD, and a skinny pen-format 5 or 10ml unicorn bottle - or maybe one of those Zippo-looking 15ml bottles - it would be an unobtrusive setup for, say, some breaks at work or an evening out.)

#52 (permalink)      1/2/2021 12:07:02 PM US Central   quote/reply + tips
Avatar
carrion4worm
Verified
  • JoinedAug 2017
  • Posts 4713
  • Reviews 282
  • Kudos2838
Hiko9 wrote:

three 14mm diameter RDAs.


oh, we doing rdas now? don't get me started....

What does he mean when he says words?
#53 (permalink)      1/2/2021 11:05:59 PM US Central   quote/reply + tips
Avatar
philipvdb
Verified
  • JoinedJun 2016
  • Posts 2820
  • Reviews 36
  • Kudos4529
+1 details
If i could find a kafun monster v3 mini, i would put it nr 4, just out of nostalgia.
We can't agree on everything.
#54 (permalink)      1/3/2021 10:44:39 AM US Central   quote/reply + tips
Avatar
cilika
Verified
  • JoinedSep 2013
  • Posts 15846
  • Reviews 382
  • Kudos29676
+1 details
philipvdb wrote:

If i could find a kafun monster v3 mini, i would put it nr 4, just out of nostalgia.


If you were on the same continent I'd send you one. I've got 3 or 4
Though I don't really know which ones exactly were the V3 minis

#55 (permalink)      1/3/2021 11:27:38 AM US Central   quote/reply + tips
Hiko9
Verified
  • JoinedJun 2013
  • Posts 5687
  • Reviews 269
  • Kudos5469
+1 details
One of them would have to be the SKU 9635984 as Essellar says. Great RDA.
The other one an original UD IGO-S because i've had this one since 2013 and it's still going on strong, still one of my favourite atomisers.
The 3rd would be an original A7 RDA - the tall one, with my DIY A7oid style drip tip converting it to Spheroid mode. The only tank i've ever had consistent service (at least, near to RDA levels of consistency) from.

Two old school AF, one modern squonker converted to top feed. I've been working on and off on making the Satmod 14500 clone from here work with 1 AA Eneloop for my use. Currently the lowest res i can get with my wire is 0.19 ohms and it isn't quite enough. Getting about 1100mah out of a 2450mah cell before output voltage drops too low. Eventually i will get some slightly lower res wire and get about 0.17 and then we will be in, i think.

Edited on 1/3/2021 at 11:47 AM. Reason:
Green Screwdriver for LIFE
#56 (permalink)      1/3/2021 2:43:48 PM US Central   quote/reply + tips
Avatar
carrion4worm
Verified
  • JoinedAug 2017
  • Posts 4713
  • Reviews 282
  • Kudos2838
+1 details
Hiko9 wrote:

One of them would have to be the SKU 9635984 as Essellar says. Great RDA.The other one an original UD IGO-S because i've had this one since 2013 and it's still going on strong, still one of my favourite atomisers. The 3rd would be an original A7 RDA - the tall one, with my DIY A7oid style drip tip converting it to Spheroid mode. The only tank i've ever had consistent service (at least, near to RDA levels of consistency) from.Two old school AF, one modern squonker converted to top feed. I've been working on and off on making the Satmod 14500 clone from here work with 1 AA Eneloop for my use. Currently the lowest res i can get with my wire is 0.19 ohms and it isn't quite enough. Getting about 1100mah out of a 2450mah cell before output voltage drops too low. Eventually i will get some slightly lower res wire and get about 0.17 and then we will be in, i think.


I hope you have the decimal point in the wrong place, because there ain't no 14500 cell (3.7)that will safely do that, much less a Double "A" battery!(1.5 volts) You need to STOP. You are talking 20 continuous amps, on a 14500.

Forum members: Whats the highest amp 14500 cell you've seen? I'm thinking 10 amps at most.

What does he mean when he says words?
#57 (permalink)      1/3/2021 2:54:12 PM US Central   quote/reply + tips
essellar
Verified
  • JoinedSep 2016
  • Posts 2311
  • Reviews 0
  • Kudos2025
+2 details
10 rated; 8 realistic under test, and it's a Vapcell rewrap. Given the capacity, and the fact that you'd have chosen it for the compact form factor that makes carrying spares self-defeating, there's no good reason to even try higher than, say, 4 or 5 amps anyway. I stay well under 3A (so over 1.2Ω minimum, and usually over 2Ω).
#58 (permalink)      1/3/2021 7:18:51 PM US Central   quote/reply + tips
Hiko9
Verified
  • JoinedJun 2013
  • Posts 5687
  • Reviews 269
  • Kudos5469
carrion4worm wrote:

I hope you have the decimal point in the wrong place, because there ain't no 14500 cell (3.7)that will safely do that, much less a Double "A" battery!(1.5 volts) You need to STOP. You are talking 20 continuous amps, on a 14500.

Forum members: Whats the highest amp 14500 cell you've seen? I'm thinking 10 amps at most.



AA NiMH, not 14500. I've seen Eneloop Pro and the older Eneloop Xs tested at 10 and more amps. At a VERY optimistic 1.1v 0.17 ohms is 6.47a, and this is in a mechanical made of stainless steel so it's probably quite a bit higher than 0.17 ohms total resistance
ONLY the Panasonic Eneloop high power variants can do this. Any other AA NiMH i've ever owned would shit itself. Pretty sure, although dont quote me on this, the Eneloops are rated 5c or a little over 12 amps


Edited on 1/3/2021 at 7:33 PM. Reason:
Green Screwdriver for LIFE
#59 (permalink)      1/18/2021 8:37:00 AM US Central   quote/reply + tips
todorov7
Verified
  • JoinedSep 2018
  • Posts 10
  • Reviews 0
  • Kudos7
Peacemaker 25mm with 8ml bubble glass for desktop use

Kayfun Lite 2019 top fill 24mm for MTL

Druga RTA for pocket setup
#60 (permalink)      1/20/2021 8:54:54 PM US Central   quote/reply + tips
Avatar
Wylie
Verified
  • JoinedMay 2013
  • Posts 5968
  • Reviews 78
  • Kudos3873
Flave RDTA- flavor beast squonked on various mods

Advken Dominator w RBA deck- Still holding strong among the new kids

Aromamizer Plus 2- Road warrior for the long trips

These have made it this long without being modified.

Edit: Ooops! Forgot about the 810 drip tip adapter I made for the Flave.

Edited on 1/20/2021 at 9:06 PM. Reason:
Always keep your ear to the ground!
#61 (permalink)      1/20/2021 9:32:41 PM US Central   quote/reply + tips
Avatar
cilika
Verified
  • JoinedSep 2013
  • Posts 15846
  • Reviews 382
  • Kudos29676
+3 details
Just vaping on a 22mm Flave RDTA. With a 510 DT on it =D