Free shipping to the United States when you order $20+

Airflow tight enough
Login to post a new topic and to write a reply.
Thread Tools


Search within thread:

Rate This Thread
Login to rate this thread.
#1 (permalink)      5/20/2022 6:15:25 PM US Central   quote/reply + tips
kushal.kushi
Verified
  • JoinedSep 2016
  • Posts 36
  • Reviews 4
  • Kudos3
Airflow tight enough
Hello Guys, Any reviews on this please, is the 0.8 pin tight enough , asking because 0.8mm pins are usually perfect for my type of draw, Any cons
#2 (permalink)      7/13/2022 9:18:38 AM US Central   quote/reply + tips
kushal.kushi
Verified
  • JoinedSep 2016
  • Posts 36
  • Reviews 4
  • Kudos3
How is the performance guys
#3 (permalink)      7/13/2022 9:32:40 AM US Central   quote/reply + tips
Avatar
analogueman
Verified
  • JoinedAug 2013
  • Posts 2986
  • Reviews 6
  • Kudos2427
I'd describe the tightest draw to be somewhere between 0.8 and 1mm.

Flavour performance is a bit more subjective. I find it to be okay. Nothing special, but usable.
#4 (permalink)      7/13/2022 2:08:40 PM US Central   quote/reply + tips
minimag03
Verified
  • JoinedApr 2018
  • Posts 112
  • Reviews 9
  • Kudos32
It obviously sounds like you're buying for MTL use but this is still worth mentioning: these were originally shipped without the 2.5mm AF pin. Instead it came with an extra MTL pin besides the 0.8mm and 1.2mm. I contacted FT and they added a 2.5mm AF pin with my next order. If you want that AF pin, you might want to check with customer service. But the good news: if you aren't worried about the 2.5mm pin, you'll prob get a 3rd MTL pin to go along with the others :)
#5 (permalink)      7/13/2022 10:08:17 PM US Central   quote/reply + tips
kushal.kushi
Verified
  • JoinedSep 2016
  • Posts 36
  • Reviews 4
  • Kudos3
Thanks a lot guys, That was very helpful, have a good one
#6 (permalink)      7/14/2022 3:36:20 AM US Central   quote/reply + tips
Avatar
analogueman
Verified
  • JoinedAug 2013
  • Posts 2986
  • Reviews 6
  • Kudos2427
No worries. It's a perfectly good atty, and would likely suit you for the extra-tight draw you prefer (1mm is my preference btw).
#7 (permalink)      7/27/2022 2:44:32 AM US Central   quote/reply + tips
kushal.kushi
Verified
  • JoinedSep 2016
  • Posts 36
  • Reviews 4
  • Kudos3
Thank you