Free shipping to the United States when you order $20+

How is the quality of this RTA
Login to post a new topic and to write a reply.
Thread Tools


Search within thread:

Rate This Thread
Login to rate this thread.
#1 (permalink)      7/18/2021 1:26:01 PM US Central   quote/reply + tips
The_Masteres
Verified
  • JoinedJan 2019
  • Posts 528
  • Reviews 2
  • Kudos167
How is the quality of this RTA
Did Anyone receive this RTA ? How Does it perform ? Thx
#2 (permalink)      7/18/2021 1:41:41 PM US Central   quote/reply + tips
starman112
Verified
  • JoinedOct 2014
  • Posts 146
  • Reviews 484
  • Kudos69
+1 details
This RTA is very good performs very well.Its one of the best wicking tanks i own.The build quality is perfect i bottom fill mines no leaks.The draw was quite loose so i put 3 orings on the inside off the 510 bottom plate I did not think it would work but improves the draw a lot,tightens the draw and makes it super smooth.I think the o'ring size i used was 14 x 1.5mm
#3 (permalink)      7/18/2021 2:23:18 PM US Central   quote/reply + tips
The_Masteres
Verified
  • JoinedJan 2019
  • Posts 528
  • Reviews 2
  • Kudos167
starman112 wrote:

This RTA is very good performs very well.Its one of the best wicking tanks i own.The build quality is perfect i bottom fill mines no leaks.The draw was quite loose so i put 3 orings on the inside off the 510 bottom plate I did not think it would work but improves the draw a lot,tightens the draw and makes it super smooth.I think the o'ring size i used was 14 x 1.5mm



Thx. Do you have the coppervape 1.1 ?

#4 (permalink)      7/18/2021 2:38:07 PM US Central   quote/reply + tips
starman112
Verified
  • JoinedOct 2014
  • Posts 146
  • Reviews 484
  • Kudos69
Yes the coppervape 1.1,i have ordered 3 more like it a lot
#5 (permalink)      7/18/2021 3:00:37 PM US Central   quote/reply + tips
Avatar
djvillan
Verified
+1 details
The_Masteres wrote:

Did Anyone receive this RTA ? How Does it perform ? Thx

It's the same as the v1 with two clear o-rings on the deck. If you already have the V1 and want more flavour from it then you just have to buy the Nano kit. SKU 9740939



Lalli wrote:

The 1.1 deck has o- rings above and under the juice- holes, so the jfc can be fully closed.
In those pics the new o-rings are clear so you need to look closely to see them.

And the bottom part is somehow slightly different too.
But I have no issues using the old upside-down trick with the v1, and this one has no 1mm pluspole so no need to get it.

Tank and chimneys look exactly the same as v1 so very strange if nano tank won’t fit.

Mille is excellent RTA so if you don’t have it I highly recommend getting one, Ulton is not available but Coppervape might be good too.

#6 (permalink)      7/19/2021 8:55:32 AM US Central   quote/reply + tips
piffpuff
Verified
  • JoinedJun 2017
  • Posts 132
  • Reviews 34
  • Kudos86
+1 details
The_Masteres wrote:

Did Anyone receive this RTA ? How Does it perform ? Thx



The airflow is rather turbulent and somewhat noisy.




Edited on 9/2/2021 at 3:39 PM. Reason:
#7 (permalink)      7/19/2021 9:00:48 AM US Central   quote/reply + tips
piffpuff
Verified
  • JoinedJun 2017
  • Posts 132
  • Reviews 34
  • Kudos86

Edited on 9/2/2021 at 3:40 PM. Reason:
#8 (permalink)      7/19/2021 3:08:22 PM US Central   quote/reply + tips
The_Masteres
Verified
  • JoinedJan 2019
  • Posts 528
  • Reviews 2
  • Kudos167
I Guess those who have the Ulton use the 1mm airflow may have a better experience with this atty.

But why coppervape does not include it, I don't understand really. Is it so difficult to produce ? I don't think so ... Maybe to sell a v 1.2 later ?
#9 (permalink)      7/19/2021 3:25:34 PM US Central   quote/reply + tips
Avatar
djvillan
Verified
The_Masteres wrote:

I Guess those who have the Ulton use the 1mm airflow may have a better experience with this atty.

But why coppervape does not include it, I don't understand really. Is it so difficult to produce ? I don't think so ... Maybe to sell a v 1.2 later ?

According to FT's and other sites listings it comes with three positive posts. One comes pre-installed and the other two are included in the spares bag.



Details:

Material: 316 Stainless Steel + Glass
Capacity: 4ml (19mm ID / 22mm OD)
Fireplace exchangeable: 12mm, 13mm and 14mm
3 bells interchangeable different (12mm pre-installed)
6 holes to control air flow rate adjustable to different
3 different sizes of the positive post with airflow (pre-installed one)
Filling system for liquid adjustable Control
510 threading connection
22mm overall diameter



Can either starman112 or piffpuff confrim how many positive posts this Coppervape V1.1 comes with?


Edited on 7/19/2021 at 6:41 PM. Reason:
#10 (permalink)      7/19/2021 5:30:03 PM US Central   quote/reply + tips
starman112
Verified
  • JoinedOct 2014
  • Posts 146
  • Reviews 484
  • Kudos69
Hi piffpuff you unscrew the bottom plate inside the plate there is a lip the o'rings i put on the the outside the lip.Putting o'rings on this cuts down the space between the airflow and the plate tightens the draw a lot.I Tryed 1.2mm thickness first made it better but 1.5mm thickness made it even better for me
#11 (permalink)      7/19/2021 6:38:32 PM US Central   quote/reply + tips
Avatar
djvillan
Verified
+1 details
starman112 wrote:

Hi piffpuff you unscrew the bottom plate inside the plate there is a lip the o'rings i put on the the outside the lip.Putting o'rings on this cuts down the space between the airflow and the plate tightens the draw a lot.I Tryed 1.2mm thickness first made it better but 1.5mm thickness made it even better for me

Which airflow positive post are you using? The 2 x 1.2mm, 1 x 1.8mm or 1 x 1mm post? This Coppervape clone did come with all three positive posts didn't it?