Free shipping to the United States when you order $20+

Review
Login to post a new topic and to write a reply.
Thread Tools


Search within thread:

Rate This Thread
Login to rate this thread.
#11 (permalink)      11/11/2020 12:46:22 PM US Central   quote/reply + tips
mmentm
Verified
  • JoinedMay 2014
  • Posts 45
  • Reviews 9
  • Kudos17
+1 details
Wylie wrote:

Mesh to wire to clearo analogy without build information, I want my 4.5 seconds back!



Lol. I admit I strayed a bit, but none of those things matter much these days. I haven't noticed any improvement with mesh RTAs and would quite happily vape stock coils exclusively.

The only reason I got the Kylin was because I bought the extension for the Tauren mech mod and needed something I could put a high resistance coil in to vape at 8.4 volts, so its a 0.9ohm N80 coil, 12 wraps of 24g.

#12 (permalink)      11/11/2020 1:01:34 PM US Central   quote/reply + tips
Avatar
Wylie
Verified
  • JoinedMay 2013
  • Posts 5968
  • Reviews 78
  • Kudos3873
mmentm wrote:

Wylie wrote:
Mesh to wire to clearo analogy without build information, I want my 4.5 seconds back!

Lol. I admit I strayed a bit, but none of those things matter much these days. I haven't noticed any improvement with mesh RTAs and would quite happily vape stock coils exclusively.

The only reason I got the Kylin was because I bought the extension for the Tauren mech mod and needed something I could put a high resistance coil in to vape at 8.4 volts, so its a 0.9ohm N80 coil, 12 wraps of 24g.


Mesh just doesn't seem to be my flavor and a previous personal conception falls in line with this RTA so it's made my list of potentials.

My intended build which should be good for mech or TC regs would be a 3.5mm ID 4 or 5 wrap Coilogy 316L MTL wire should there be enough room for the wick which has me holding off for first hand inspection prior to purchase.

Edit: More likely 5 wraps, and I'm stickin to it.


Edited on 11/11/2020 at 1:09 PM. Reason:
Always keep your ear to the ground!
#13 (permalink)      11/11/2020 1:55:00 PM US Central   quote/reply + tips
mmentm
Verified
  • JoinedMay 2014
  • Posts 45
  • Reviews 9
  • Kudos17
Wylie wrote:

Mesh just doesn't seem to be my flavor and a previous personal conception falls in line with this RTA so it's made my list of potentials.My intended build which should be good for mech or TC regs would be a 3.5mm ID 4 or 5 wrap Coilogy 316L MTL wire should there be enough room for the wick which has me holding off for first hand inspection prior to purchase.Edit: More likely 5 wraps, and I'm stickin to it.



I had 12 wraps at 3.0 ID and there was shit loads of room so you'll be laughing with 5 wraps.

#14 (permalink)      11/11/2020 1:56:41 PM US Central   quote/reply + tips
Avatar
Wylie
Verified
  • JoinedMay 2013
  • Posts 5968
  • Reviews 78
  • Kudos3873
mmentm wrote:

Wylie wrote:Mesh just doesn't seem to be my flavor and a previous personal conception falls in line with this RTA so it's made my list of potentials.My intended build which should be good for mech or TC regs would be a 3.5mm ID 4 or 5 wrap Coilogy 316L MTL wire should there be enough room for the wick which has me holding off for first hand inspection prior to purchase.Edit: More likely 5 wraps, and I'm stickin to it.

I had 12 wraps at 3.0 ID and there was shit loads of room so you'll be laughing with 5 wraps.


My bad, spaced coils anyway, has to be for TC circuits.

Always keep your ear to the ground!
#15 (permalink)      11/11/2020 2:43:49 PM US Central   quote/reply + tips
Avatar
Andy.lion
Verified
  • JoinedMay 2015
  • Posts 12042
  • Reviews 25
  • Kudos32074
The original mini was/is my favourite tank, in my hand now as it happens. No reason this won't be a winner (for me at least) too.
I learned long ago, never to wrestle with a pig. You both get dirty, but the pig likes it.” George Bernard Shaw
#16 (permalink)      11/12/2020 2:37:42 PM US Central   quote/reply + tips
EternalSpline
Verified
  • JoinedJan 2015
  • Posts 5782
  • Reviews 9
  • Kudos4137
I hope they do a dual coil version
#17 (permalink)      11/12/2020 3:04:07 PM US Central   quote/reply + tips
mmentm
Verified
  • JoinedMay 2014
  • Posts 45
  • Reviews 9
  • Kudos17
EternalSpline wrote:

I hope they do a dual coil version



You missed it: https://www.fasttech.com/products/0/10033795/9675558-authentic-vandy-vape-kylin-v2-rta-rebuildable

#18 (permalink)      11/12/2020 3:19:10 PM US Central   quote/reply + tips
EternalSpline
Verified
  • JoinedJan 2015
  • Posts 5782
  • Reviews 9
  • Kudos4137
mmentm wrote:

EternalSpline wrote:
I hope they do a dual coil version

You missed it: https://www.fasttech.com/products/0/10033795/9675558-authentic-vandy-vape-kylin-v2-rta-rebuildable



That is the bottom airflow old version, I can still find that one if I want it. I would like them to come out with this top airflow, but in a dual coil.

#19 (permalink)      11/12/2020 3:28:58 PM US Central   quote/reply + tips
mmentm
Verified
  • JoinedMay 2014
  • Posts 45
  • Reviews 9
  • Kudos17
EternalSpline wrote:

mmentm wrote:
EternalSpline wrote:
I hope they do a dual coil version

You missed it: https://www.fasttech.com/products/0/10033795/9675558-authentic-vandy-vape-kylin-v2-rta-rebuildable

That is the bottom airflow old version, I can still find that one if I want it. I would like them to come out with this top airflow, but in a dual coil.



Yeah, I was kidding. I missed that one and was hoping the same as you. The original is one of my all time favs.

#20 (permalink)      11/12/2020 3:37:44 PM US Central   quote/reply + tips
EternalSpline
Verified
  • JoinedJan 2015
  • Posts 5782
  • Reviews 9
  • Kudos4137
+1 details
I don't own any of the Kylin series. I have thought about getting the V2, but figure for the cost might as well wait for this in a dual coil configuration. The v2, that you and I both missed is really not all that cheap for how old it is. I have found it on I think only one site in the US. Probably find it at a site in China for less.
#21 (permalink)      11/12/2020 3:57:25 PM US Central   quote/reply + tips
mmentm
Verified
  • JoinedMay 2014
  • Posts 45
  • Reviews 9
  • Kudos17
I decided to get one a while back when my V1 gave out but I couldn't find one, not even in China or pre-owned.