Free shipping to the United States when you order $20+

Anyone received this?
Login to post a new topic and to write a reply.
Thread Tools


Search within thread:

Rate This Thread
Login to rate this thread.
#11 (permalink)      8/9/2020 3:54:32 PM US Central   quote/reply + tips
Zollo
Verified
  • JoinedOct 2015
  • Posts 48
  • Reviews 36
  • Kudos3
vape_monkie wrote:

Which one of the clones (manufacturer) for the FL is recommended? I was interested in the DL version and if I understand correctly the inserts are cross compatible with both the 22 and 24mm versions? Will a 22 mm MTL insert, fit the DL version too? Meaning both MTL and DL versions can be converted to DL and MTL, using different inserts?Am I talking sense because that sounds too good to be true...:D



I recommend the Yftk clone,I think it is the best factory.The Mtl and DL parts are completely different, not compatible with each other.

#12 (permalink)      8/10/2020 3:25:12 AM US Central   quote/reply + tips
essellar
Verified
  • JoinedSep 2016
  • Posts 2311
  • Reviews 0
  • Kudos2027
+1 details
blackhack wrote:

if you like tight mtl, you might like it, but it's not for me.


You can't get a tight MTL out of it with the standard included air plate. A loose/"modern" MTL, sure, but not a tight draw. It starts where the original Berserker leaves off (1.6mm).

And it's hardly a difficult build, either - install a coil in the normal way coils are installed, put cotton through and cut to length - there's no tucking anything to do, really. Sure, you can make a meal of it if you think there must be a trick involved, but it really is as easy as that.

#13 (permalink)      8/10/2020 5:39:39 AM US Central   quote/reply + tips
Avatar
laxal
Verified
  • JoinedOct 2013
  • Posts 382
  • Reviews 40
  • Kudos349

Edited on 9/28/2020 at 3:57 PM. Reason:
#14 (permalink)      8/10/2020 6:25:02 AM US Central   quote/reply + tips
essellar
Verified
  • JoinedSep 2016
  • Posts 2311
  • Reviews 0
  • Kudos2027
+1 details
The accessory plates will get you a tighter MTL or a looser DL - the one that comes with the tank is in the middle. The MTL plate has 0.8mm to 1.5mm holes by 0.1mm (so 0.8, 0.9. 1.0...). The RDL plate has 3 × 0.9mm, 3 × 1.1mm, 2 × 1.6mm, 2 × 1.8mm and the oval slots are about 2mm × 3mm and 2mm × 3.5mm (or thereabouts). The plate that comes with it has 2.4mm and 2.6mm holes, but the 2 × 1.8mm holes setting on the RDL/multi-hole accessory plate will get you closer to 2.5mm if the two standard holes aren't close enough.
#15 (permalink)      8/10/2020 6:56:10 AM US Central   quote/reply + tips
Avatar
laxal
Verified
  • JoinedOct 2013
  • Posts 382
  • Reviews 40
  • Kudos349

Edited on 9/28/2020 at 3:57 PM. Reason:
#16 (permalink)      8/10/2020 7:21:38 AM US Central   quote/reply + tips
essellar
Verified
  • JoinedSep 2016
  • Posts 2311
  • Reviews 0
  • Kudos2027
+1 details
Don't have it handy to measure. I had an authentic to look at for a couple of days, just long enough to form an opinion about it, really. Like most VWM stuff, it's not worth the asking price (for the authentic), and it has its quirks. It's a good-enough tank, but I much prefer the simplicity of the Dvarw. It does wick better then the Dvarw MTL for RDL vaping, but I don't vape RDL unless I'm testing a tank or a new e-liquid recipe. (I'm a 0.8mm kind of guy.)
#17 (permalink)      8/10/2020 8:31:13 AM US Central   quote/reply + tips
Avatar
laxal
Verified
  • JoinedOct 2013
  • Posts 382
  • Reviews 40
  • Kudos349

Edited on 9/28/2020 at 3:57 PM. Reason:
#18 (permalink)      8/10/2020 8:31:31 AM US Central   quote/reply + tips
Avatar
laxal
Verified
  • JoinedOct 2013
  • Posts 382
  • Reviews 40
  • Kudos349

Edited on 8/10/2020 at 8:32 AM. Reason: Double Post
#19 (permalink)      8/11/2020 5:23:33 AM US Central   quote/reply + tips
Avatar
laxal
Verified
  • JoinedOct 2013
  • Posts 382
  • Reviews 40
  • Kudos349

Edited on 9/28/2020 at 3:58 PM. Reason:
#20 (permalink)      8/19/2020 3:56:41 PM US Central   quote/reply + tips
lanceG
Verified
  • JoinedJun 2013
  • Posts 123
  • Reviews 2
  • Kudos33
+1 details
Ryno619 wrote:

I have my eye on this one and the Scylla. I’m also waiting to hear more feedback. They claim that the Imperia is an upgrade/update of the Integra rta. Another reason why I’m holding off is due to the fact that the MTL disk is a separate purchase :/



I have both the Dvarw FL and the Scylla and I like them both. The Scylla is my favorite new rta, and it's better than almost any other rta I have ever used, authentics included. The only one with better flavor, imho, is my Gem II. The dvarw is pretty easy to build, easier than most, and the scylla is probably the easiest to build I have ever come across, however the tank and base assembly takes a minute to get the hang of (but is very cool, intuitive, and rather unique). The scylla deck is very reminiscent of the Integra.

#21 (permalink)      8/19/2020 4:39:20 PM US Central   quote/reply + tips
Avatar
Ryno619
Verified
  • JoinedApr 2019
  • Posts 439
  • Reviews 46
  • Kudos281
lanceG wrote:


I have both the Dvarw FL and the Scylla and I like them both. The Scylla is my favorite new rta, and it's better than almost any other rta I have ever used, authentics included. The only one with better flavor, imho, is my Gem II. The dvarw is pretty easy to build, easier than most, and the scylla is probably the easiest to build I have ever come across, however the tank and base assembly takes a minute to get the hang of (but is very cool, intuitive, and rather unique). The scylla deck is very reminiscent of the Integra.




Thanks, wasn't even aware of the Gem II RTA. There are three Gem's listed on FT, is it one of those?
I have a FL on the way since my wife nicked my V2. Going to for sure put the Scylla on the top of my wish list, right above the Millennium.

“For every minute you are angry you lose sixty seconds of happiness.”