shopping cart empty
base shorts with the 510 pin
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#1 (permalink)      1/21/2021 10:43:32 AM US Central   quote/reply + tips
Gekff
Member
  • JoinedJul 2018
  • Posts 25
  • Reviews 20
  • Kudos9
base shorts with the 510 pin
Hi guys I have bought this but i'm struggling glowing the coil with the 510 adapter, in the mod itself there is no issues but outside it doesn't work. suggestion? i saw a review with my same problem, anybody has a solution?
#2 (permalink)      1/21/2021 10:54:14 AM US Central   quote/reply + tips
stuartd
Member
  • JoinedJul 2014
  • Posts 583
  • Reviews 89
  • Kudos183
I had the same problem when I had mine. I had to unscrew the adaptor a tiny bit to get it to work properly its was like the adaptor was too long but after some fiddling with it I got to work most of the time I changed the coil
#3 (permalink)      1/21/2021 2:45:02 PM US Central   quote/reply + tips
Avatar
Wylie
Member
  • JoinedMay 2013
  • Posts 5548
  • Reviews 77
  • Kudos3586
I've found the same, don't over tighten.
Always keep your ear to the ground!
#4 (permalink)      1/21/2021 3:33:23 PM US Central   quote/reply + tips
Gekff
Member
  • JoinedJul 2018
  • Posts 25
  • Reviews 20
  • Kudos9
What's the plastic screw you talk about Wylie? The 510 connector? I've tried unscrewing it but it started staggering. Is it ok?
#5 (permalink)      1/21/2021 4:16:46 PM US Central   quote/reply + tips
Avatar
Wylie
Member
  • JoinedMay 2013
  • Posts 5548
  • Reviews 77
  • Kudos3586
Its more of a threaded bushing than a screw that your different air flow parts slip into, it's likely it's too tight when the atomizer is shorting.
The C looking toll will work for the threaded bushing.

As this bushing is tightened it draws the metal threaded ring it screws into closer to the other posts metal base. You'll see it if you look for just below where your coil is.

Edited on 1/21/2021 at 4:17 PM. Reason:
Always keep your ear to the ground!
#6 (permalink)      1/21/2021 4:23:01 PM US Central   quote/reply + tips
Avatar
Wylie
Member
  • JoinedMay 2013
  • Posts 5548
  • Reviews 77
  • Kudos3586
The threaded bushing I'm referring to is the tan colored ring around the various air inlets parts included in this kit.
Your 510 adapter applies force in the same direction so don't tighten it too tight as well.

Edited on 1/21/2021 at 4:24 PM. Reason:
Always keep your ear to the ground!
#7 (permalink)      1/21/2021 5:32:53 PM US Central   quote/reply + tips
Gekff
Member
  • JoinedJul 2018
  • Posts 25
  • Reviews 20
  • Kudos9
Ok thanks! Would have never thought about that, thanks again!