shopping cart empty
WORLDWIDE FREE SHIPPING

Enough Or Too Much?
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#1 (permalink)      9/17/2019 11:27:04 AM US Central   quote/reply + tips
Avatar
Morris68
Member
  • JoinedNov 2014
  • Posts 5186
  • Reviews 50
  • Kudos8158
Enough Or Too Much?
Having a bit of dry hit problems. Installed a Wotofo mesh strip which seems to burn perfectly but I tend to get dry hits. How much wicking material do you find best.

Had it right the first build...for a while and don't really remember how I wicked it. Tried a complex wire build but still the same problem.

Your experiences and solutions would be appreciated.
“O wad some Power the giftie gie us, to see oursels as ithers see us!" Robert Burns
#2 (permalink)      9/17/2019 11:40:48 AM US Central   quote/reply + tips
Avatar
foxey
Member
  • JoinedJun 2013
  • Posts 3623
  • Reviews 87
  • Kudos2712
+2 details
Use the rip trippers three wick style,
lift up the top two ,and cut the bottom one close to mesh.
You don't have to use the lace ones one pad cut into thirds is perfect.
Cut ends of remaining wick so it's 50/50 in juice slot,
Not at the angle that most do just straight and fluff it up
There you go mine wicks perfectly..
I told you so !
#3 (permalink)      9/17/2019 12:53:47 PM US Central   quote/reply + tips
Avatar
foxey
Member
  • JoinedJun 2013
  • Posts 3623
  • Reviews 87
  • Kudos2712
+3 details
Rip trips mesh rta wick
I told you so !
#4 (permalink)      9/17/2019 12:59:37 PM US Central   quote/reply + tips
Avatar
desuede
Member
  • JoinedOct 2015
  • Posts 1407
  • Reviews 0
  • Kudos1252
+3 details
#5 (permalink)      9/17/2019 2:03:57 PM US Central   quote/reply + tips
Avatar
foxey
Member
  • JoinedJun 2013
  • Posts 3623
  • Reviews 87
  • Kudos2712
+3 details
That's the one 👍
Just mimic the 3 wicks with muji/bacon or whatever you like
Cut straight the remanding 2 fluff and stuff lol
I told you so !
#6 (permalink)      9/17/2019 2:28:13 PM US Central   quote/reply + tips
Avatar
Morris68
Member
  • JoinedNov 2014
  • Posts 5186
  • Reviews 50
  • Kudos8158
+3 details
And damned if I didn't receive 2 packs of Fiberbolt Cotton just a week ago! Thanks for the great advice. Had found a Rip Tripper's Kylin Tutorial but he hadn't devised this wicking method at the time. Will give it a try!
“O wad some Power the giftie gie us, to see oursels as ithers see us!" Robert Burns
#7 (permalink)      9/18/2019 10:26:50 AM US Central   quote/reply + tips
Avatar
Morris68
Member
  • JoinedNov 2014
  • Posts 5186
  • Reviews 50
  • Kudos8158
+1 details
Success! Just tried my first 3 wick build and it works fine...no dry hits. Have a feeling it'll get even better with a bit of break-in time as Rip Tripper's mentions and is often the case. Thanks all!

PS: Might want to try the Profile Unity (Style). There's one for $9+ and another for $11+. Any opinions on either or both?

Edited on 9/18/2019 at 10:30 AM. Reason:
“O wad some Power the giftie gie us, to see oursels as ithers see us!" Robert Burns
#8 (permalink)      9/18/2019 10:53:18 AM US Central   quote/reply + tips
Avatar
FloWo1701
Member
  • JoinedJul 2016
  • Posts 3769
  • Reviews 78
  • Kudos2313
Morris68 wrote:

PS: Might want to try the Profile Unity (Style). There's one for $9+ and another for $11+. Any opinions on either or both?


+1

Gina Royal: https://youtu.be/t2qAGfxoRu4
#9 (permalink)      9/18/2019 11:26:06 AM US Central   quote/reply + tips
Avatar
foxey
Member
  • JoinedJun 2013
  • Posts 3623
  • Reviews 87
  • Kudos2712
Morris68 wrote:

Success! Just tried my first 3 wick build and it works fine...no dry hits. Have a feeling it'll get even better with a bit of break-in time as Rip Tripper's mentions and is often the case. Thanks all!PS: Might want to try the Profile Unity (Style). There's one for $9+ and another for $11+. Any opinions on either or both?





Well done Morris ,I use this method for my kylins and unities,works perfect
I have an original unity and a clone with the gold etching profile like these,
and the only difference is the logo and finish is a little under par from clone,and also doesn't come with mesh bending rod and wicks mesh etc
But they both vape absolutely indistinguishable,
A bubble glass for the unity is a nice addition sold separately.

I told you so !
#10 (permalink)      9/18/2019 12:09:32 PM US Central   quote/reply + tips
Avatar
Morris68
Member
  • JoinedNov 2014
  • Posts 5186
  • Reviews 50
  • Kudos8158
+2 details
"Well done"...thanks to you foxey...and desuede! Right now I'm running it in TC mode on an old Modefined Sirius (good mod) and it vapes admirably.

Any idea which of the styled profiles I should order ($9 or $11)/
“O wad some Power the giftie gie us, to see oursels as ithers see us!" Robert Burns
#11 (permalink)      9/18/2019 12:40:52 PM US Central   quote/reply + tips
Avatar
foxey
Member
  • JoinedJun 2013
  • Posts 3623
  • Reviews 87
  • Kudos2712
I can't Morris as I got mine elsewhere sorry,
I told you so !