Free shipping to the United States when you order $20+

Drip Tip ?
Login to post a new topic and to write a reply.
Thread Tools


Search within thread:

Rate This Thread
Login to rate this thread.
#11 (permalink)      2/27/2021 2:54:20 PM US Central   quote/reply + tips
Lalli
Verified
  • JoinedSep 2016
  • Posts 214
  • Reviews 2
  • Kudos149
My clone is pretty good, vape is nice but daily use is not so great. Tighter airflow would be good too.
#12 (permalink)      2/27/2021 3:09:44 PM US Central   quote/reply + tips
Avatar
analogueman
Verified
  • JoinedAug 2013
  • Posts 2635
  • Reviews 5
  • Kudos2095
Lalli wrote:

My clone is pretty good, vape is nice but daily use is not so great. Tighter airflow would be good too.


Tighter? You must prefer a really tight draw then. :-)

I'm pretty sure, and this is totally opinion, that I can roughly get a 0.8mm equivalent on the very smallest single airflow option, closed off halfway. Indeed, it's a bit too tight for me, so I have that single airflow hole fully open for a 1mm equivalent.

It's twelve inches long, but don't use it as a rule...
#13 (permalink)      2/27/2021 3:28:27 PM US Central   quote/reply + tips
Avatar
carrion4worm
Verified
  • JoinedAug 2017
  • Posts 4712
  • Reviews 282
  • Kudos2836
+1 details
The 23mm thing doesn't look good on 22mm tubes, but actually look much better than 22mm RTAs on a Side by Side, that's where my Taifun and Vapor Giant 23mms go. Most SBS are 24mm, so you get that little airflow buffer, and no chance of rub.
What does he mean when he says words?
#14 (permalink)      2/28/2021 12:24:48 AM US Central   quote/reply + tips
Avatar
djvillan
Verified
+3 details
Gatok wrote:

It attracts me, but i'm not sure about the 23mm diameter. Has Someone tried it on a 22mm tube? On a Pico 75w? Does it overhang too much?




Edited on 2/28/2021 at 3:12 AM. Reason:
#15 (permalink)      3/28/2021 10:54:51 AM US Central   quote/reply + tips
Avatar
Gatok
Verified
  • JoinedSep 2018
  • Posts 737
  • Reviews 21
  • Kudos1094
+1 details
Mine delivered.

I'm only interested in the smallest AFC hole, should I place the coil over it?

With the coil so close to the post, the chamber is not going to get very hot?

#16 (permalink)      3/28/2021 1:33:26 PM US Central   quote/reply + tips
lazyfitter
Verified
  • JoinedFeb 2016
  • Posts 3989
  • Reviews 0
  • Kudos7921
+2 details
Gatok wrote:

Mine delivered.

I'm only interested in the smallest AFC hole, should I place the coil over it?

With the coil so close to the post, the chamber is not going to get very hot?


No! You should keep your coil in the centre. The airholes are angled so that whichever one you want to use the air will hit dead center of your coil . It's explained in the review of the original by Todds reviews.

#17 (permalink)      3/28/2021 1:38:21 PM US Central   quote/reply + tips
Avatar
Gatok
Verified
  • JoinedSep 2018
  • Posts 737
  • Reviews 21
  • Kudos1094
+1 details
Oh, thank you.
#18 (permalink)      3/28/2021 3:20:45 PM US Central   quote/reply + tips
steamer861
Verified
  • JoinedJan 2014
  • Posts 111
  • Reviews 0
  • Kudos103
+3 details
It'a a 23mm, but fits nice on a 24mm mod :) I just ordered a second one today :) The glass tank tube is a must have!
I get a perfect MTL on the second hole :)

#19 (permalink)      3/29/2021 1:04:38 PM US Central   quote/reply + tips
Avatar
Gatok
Verified
  • JoinedSep 2018
  • Posts 737
  • Reviews 21
  • Kudos1094
+1 details
Is this the right position?

#20 (permalink)      3/29/2021 1:11:05 PM US Central   quote/reply + tips
Avatar
carrion4worm
Verified
  • JoinedAug 2017
  • Posts 4712
  • Reviews 282
  • Kudos2836
+1 details
Looks good! I's try that for starters!
What does he mean when he says words?
#21 (permalink)      3/29/2021 1:31:09 PM US Central   quote/reply + tips
Avatar
Gatok
Verified
  • JoinedSep 2018
  • Posts 737
  • Reviews 21
  • Kudos1094
Thanks.