shopping cart empty
WORLDWIDE FREE SHIPPING

1.2 mm centre pin?
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#1 (permalink)      7/25/2019 4:12:18 PM US Central   quote/reply + tips
fis1976
Member
  • JoinedApr 2018
  • Posts 18
  • Reviews 0
  • Kudos7
1.2 mm centre pin?
It seems like there is not a single manufacturer that made the 1.2mm pin, or I'm missing it?
#2 (permalink)      7/25/2019 8:42:48 PM US Central   quote/reply + tips
Avatar
VinTCV
Member
  • JoinedJun 2017
  • Posts 174
  • Reviews 109
  • Kudos150
fis1976 wrote:

It seems like there is not a single manufacturer that made the 1.2mm pin, or I'm missing it?




Maybe not yet?

#3 (permalink)      8/11/2019 3:36:34 PM US Central   quote/reply + tips
fis1976
Member
  • JoinedApr 2018
  • Posts 18
  • Reviews 0
  • Kudos7
@Anniepan any info from any of the manufacturers? The 1.2mm centre pin is available for more than 2 months. Too bad if they dont plan to make it, all of them made all other accessories for the KF Lite 2019 :(
#4 (permalink)      8/11/2019 6:05:42 PM US Central   quote/reply + tips
Avatar
desuede
Member
  • JoinedOct 2015
  • Posts 1177
  • Reviews 0
  • Kudos973
fis1976 wrote:

It seems like there is not a single manufacturer that made the 1.2mm pin, or I'm missing it?


You're missing it. They are available in many web shops. 😉
Just search for "Kayfun Lite XS Centerpin"

#5 (permalink)      8/12/2019 2:57:21 AM US Central   quote/reply + tips
fis1976
Member
  • JoinedApr 2018
  • Posts 18
  • Reviews 0
  • Kudos7
desuede wrote:

fis1976 wrote:
It seems like there is not a single manufacturer that made the 1.2mm pin, or I'm missing it?
You're missing it. They are available in many web shops. 😉
Just search for "Kayfun Lite XS Centerpin"



I know its available from SvoeMesto I was asking about clone manufacturers here on FT, the original with shipping will cost me more or less same as a new clone atty.

#6 (permalink)      8/12/2019 3:44:20 AM US Central   quote/reply + tips
Avatar
desuede
Member
  • JoinedOct 2015
  • Posts 1177
  • Reviews 0
  • Kudos973
Unfortunately that pin doesn't seem to be available here or in any other Chinese online store. Or any other places like Ali, Ebay and so on.

That is why I referred to the original.
That one is available in many online stores apart from the original manufacturer's, both in Europe and in North America.
Check the search link I posted in my previous post.

Edited on 8/12/2019 at 4:20 AM. Reason:
#7 (permalink)      8/12/2019 6:04:20 AM US Central   quote/reply + tips
fis1976
Member
  • JoinedApr 2018
  • Posts 18
  • Reviews 0
  • Kudos7
+1 details
desuede wrote:

Unfortunately that pin doesn't seem to be available here or in any other Chinese online store. Or any other places like Ali, Ebay and so on.That is why I referred to the original.That one is available in many online stores apart from the original manufacturer's, both in Europe and in North America.Check the search link I posted in my previous post.



Already checked (even before I opened this topic 3 weeks ago and I'm checking since the day the pin was announced). The original pin will cost me 16 euros with shipping. Every known and unknown cloner made all other accessories: extensions, drip tips, top fill etc. but the most important accessory for all that like tighter draw is not made.

#8 (permalink)      8/12/2019 7:16:11 AM US Central   quote/reply + tips
RuiGr
Member
  • JoinedJun 2019
  • Posts 5
  • Reviews 7
  • Kudos3
+1 details
My yftk clone came with 3 pins. 1 in ss and 2 in nylon (???).

You can probably get some post screws in fasttech that are the same size or could be cut to fit. If it leakes a bit using a small piece of teflon tape should fix it.
#9 (permalink)      8/12/2019 7:16:15 AM US Central   quote/reply + tips
RuiGr
Member
  • JoinedJun 2019
  • Posts 5
  • Reviews 7
  • Kudos3
If anything fails, getting another tank would get you the spare parts you need and an extra functional tank.

Edited on 8/12/2019 at 7:17 AM. Reason:
#10 (permalink)      8/12/2019 10:26:15 AM US Central   quote/reply + tips
fis1976
Member
  • JoinedApr 2018
  • Posts 18
  • Reviews 0
  • Kudos7
+1 details
RuiGr wrote:

My yftk clone came with 3 pins. 1 in ss and 2 in nylon (???).

You can probably get some post screws in fasttech that are the same size or could be cut to fit. If it leakes a bit using a small piece of teflon tape should fix it.




I'm talking about the centre pin (see the photo above posted by @desuede) not the nylon pins (screws). Few months after SvoeMesto released the Lite 2019 they also made new centre pin, 1.2mm in diameter, the one that comes with the atty is 1.8mm.

#11 (permalink)      8/21/2019 9:00:58 AM US Central   quote/reply + tips
fis1976
Member
  • JoinedApr 2018
  • Posts 18
  • Reviews 0
  • Kudos7
Anyone tried original 1.2 mm centre pin on YFTK KF Lite 2019 22mm? Does it fit? I dont want to burn 15 euros!

Edited on 8/21/2019 at 9:01 AM. Reason: