shopping cart empty
WORLDWIDE FREE SHIPPING

Wouldnt buy one
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#11 (permalink)      2/23/2019 6:29:44 AM US Central   quote/reply + tips
Troepfler
Member
  • JoinedJan 2014
  • Posts 434
  • Reviews 0
  • Kudos265
MichelArgouet wrote:

Well... with SKU 2157501 on the top of the mod, it’s ok.
Cheap and safe.



I used similar ones but the paper expands when wet and it can be difficult to remove the atty from the mod.
And the paper gaskets are perhaps difficult to remove because they are glued on.
The issue is not mainly a leaking atty, I think the condensation between the hot atty and the cold mod is the bigger problem.
On the Atto I use a very small O-Ring tight around the 510.
If the mod cap looks like Pico picture #4 SKU 4849000 I use a larger thin O-Ring.
Perhaps for caps like Pico a copper ring helps to reduce condensation
because the copper compensate the temperature between atty and mod.
I never tried SKU 9628656 but this gasket is a closed cell heat insulation
and is also tight if the liquid is coming from outside.
And it is thin: 0.5mm.


Edited on 2/23/2019 at 6:35 AM. Reason:
#12 (permalink)      2/23/2019 6:50:28 AM US Central   quote/reply + tips
wuwei.ap
Member
  • JoinedMar 2015
  • Posts 22101
  • Reviews 266
  • Kudos42144
+2 details
OT...

@Troepfler, the switches I mentioned before arrived, they are exactly the same. The quality looks as good or better than what is fitted. You can take.

#13 (permalink)      2/23/2019 6:53:21 AM US Central   quote/reply + tips
Avatar
Wylie
Member
  • JoinedMay 2013
  • Posts 4834
  • Reviews 75
  • Kudos3061
+2 details
Troepfler wrote:

MichelArgouet wrote:Well... with SKU 2157501 on the top of the mod, it’s ok. Cheap and safe.I used similar ones but the paper expands when wet and it can be difficult to remove the atty from the mod.And the paper gaskets are perhaps difficult to remove because they are glued on.The issue is not mainly a leaking atty, I think the condensation between the hot atty and the cold mod is the bigger problem.On the Atto I use a very small O-Ring tight around the 510.If the mod cap looks like Pico picture #4 SKU 4849000 I use a larger thin O-Ring.Perhaps for caps like Pico a copper ring helps to reduce condensationbecause the copper compensate the temperature between atty and mod.I never tried SKU 9628656 but this gasket is a closed cell heat insulationand is also tight if the liquid is coming from outside.And it is thin: 0.5mm.


Besides the insulators I plan to use a little silicone putty under the contact in the mod.

Centering of the insulators may be able to be done with an o-ring.

This has yet to be seen though.

Always keep your ear to the ground!
#14 (permalink)      2/23/2019 6:57:08 AM US Central   quote/reply + tips
Avatar
IRISH_OS1R1S
Member
  • JoinedJun 2015
  • Posts 562
  • Reviews 342
  • Kudos523
+1 details
Upgraded chip incoming?

#15 (permalink)      2/23/2019 7:06:03 AM US Central   quote/reply + tips
Avatar
Wylie
Member
  • JoinedMay 2013
  • Posts 4834
  • Reviews 75
  • Kudos3061
IRISH_OS1R1S wrote:

Upgraded chip incoming?


👍

Always keep your ear to the ground!
#16 (permalink)      2/23/2019 7:15:06 AM US Central   quote/reply + tips
Troepfler
Member
  • JoinedJan 2014
  • Posts 434
  • Reviews 0
  • Kudos265
"and any user need new chip, we will send them too (FREE?). thanks"

Good idea, manufacturig price is perhaps only 20 Cents.

Edited on 2/23/2019 at 7:16 AM. Reason:
#17 (permalink)      2/23/2019 7:18:10 AM US Central   quote/reply + tips
Avatar
Wylie
Member
  • JoinedMay 2013
  • Posts 4834
  • Reviews 75
  • Kudos3061
+1 details
I'm thinking 20350s and 20650s may fly with the tubes insulators removed, again has yet to be seen.
Always keep your ear to the ground!
#18 (permalink)      2/23/2019 7:28:00 AM US Central   quote/reply + tips
Sprok
Member
  • JoinedFeb 2019
  • Posts 787
  • Reviews 0
  • Kudos0
Post deleted by mod (Anniepan) on grounds of: Spam
#19 (permalink)      2/23/2019 7:28:04 AM US Central   quote/reply + tips
Sprok
Member
  • JoinedFeb 2019
  • Posts 787
  • Reviews 0
  • Kudos0
Post deleted by mod (Anniepan) on grounds of: Spam
#20 (permalink)      2/23/2019 7:28:04 AM US Central   quote/reply + tips
Sprok
Member
  • JoinedFeb 2019
  • Posts 787
  • Reviews 0
  • Kudos0
Post deleted by mod (Anniepan) on grounds of: Spam
#21 (permalink)      2/23/2019 7:28:04 AM US Central   quote/reply + tips
Sprok
Member
  • JoinedFeb 2019
  • Posts 787
  • Reviews 0
  • Kudos0
Post deleted by mod (Anniepan) on grounds of: Spam