Best build?: FastTech Forums

Thread Tools Rate This Thread Subscribe to this thread Working... Search within thread: Login to rate this thread.
#1 (permalink) 1/10/2021 4:05:33 AM US Central quote/reply + tips
philipvdb Member JoinedJun 2016 Posts 2420 Reviews 29 Kudos4057	Best build? I found this to be very restricted so i hardly used it. I drilled out the airholes and now i can hardly put it down. I'm interested to know what builds you use in this. Inner diameter, gauge etc... Edited on 1/10/2021 at 4:05 AM. Reason: We can't agree on everything. Working...
#2 (permalink) 1/10/2021 8:28:11 AM US Central quote/reply + tips
djvillan Member JoinedAug 2015 Posts 21700 Reviews 1620 Kudos26028	+2 details I use these SKU 9655072 and these SKU 9677539. The latter are now discontinued here but still available elsewhere. https://www.youtube.com/watch?v=bgPDW0ZpgJU Working...
#3 (permalink) 1/10/2021 9:53:15 AM US Central quote/reply + tips
Gatok Member JoinedSep 2018 Posts 560 Reviews 21 Kudos889	+1 details Whatever the coil you put on, go for 3.5mm or even 4mm ID. This is the kind of atomizer where the coil diameter makes a significant difference in terms of performance. Working...
#4 (permalink) 1/10/2021 10:23:59 AM US Central quote/reply + tips
philipvdb Member JoinedJun 2016 Posts 2420 Reviews 29 Kudos4057	+2 details For me, it's about finding the right diameter and height of the coil. We can't agree on everything. Working...
#5 (permalink) 1/10/2021 10:39:12 AM US Central quote/reply + tips
carrion4worm Member JoinedAug 2017 Posts 2018 Reviews 247 Kudos1083	+1 details This atty in general (dont have this version, but I assume airflow is close to 1:1) can take a 3.5mm coil, and larger, though I like a little room for air to move. Then i make the top of the coil even with the top of the posts. So, how much larger did you make the airflow? Did you drill one side? Both? Edited on 1/10/2021 at 10:40 AM. Reason: Insert idiotic mantra here. Working...
#6 (permalink) 1/10/2021 10:47:14 AM US Central quote/reply + tips
philipvdb Member JoinedJun 2016 Posts 2420 Reviews 29 Kudos4057	Both.1 side 5/64, other side 3/32. Now it makes me think of an aerier orchid. We can't agree on everything. Working...
#7 (permalink) 1/18/2021 7:02:33 PM US Central quote/reply + tips
shockermane Member JoinedJan 2015 Posts 59 Reviews 9 Kudos14	Can you post pics of your mod? I like this but would like more air as well!! Working...
#8 (permalink) 1/25/2021 8:39:56 PM US Central quote/reply + tips
WaveyPNewton Member JoinedDec 2016 Posts 3 Reviews 0 Kudos0	I just got mine in the mail and I have 2 issues...it seems like the juice flow control is really tight and hard to turn...it got a little better after I put some juice in the tank but I'm assuming it gets looser as I use it more? 2nd, does the glass separate from the bell part? It's shown totally disassembled in the product pictures, but I can not take it apart for some reason. Working...
#9 (permalink) 1/26/2021 5:12:29 AM US Central quote/reply + tips
djvillan Member JoinedAug 2015 Posts 21700 Reviews 1620 Kudos26028	You have to remove the juice flow control and lube the o-ring on the deck/base. When screwing the tank back on don't over tighten it or you won't be able to turn the jfc. The tank screws off from the bell part/chimney. Edited on 1/26/2021 at 5:13 AM. Reason: https://www.youtube.com/watch?v=bgPDW0ZpgJU Working...
#10 (permalink) 1/26/2021 11:36:37 AM US Central quote/reply + tips
WaveyPNewton Member JoinedDec 2016 Posts 3 Reviews 0 Kudos0	how do you remove the juice flow control? I took it apart to clean it but I didn't see how to do that. Working...
#11 (permalink) 1/26/2021 11:36:40 AM US Central quote/reply + tips
WaveyPNewton Member JoinedDec 2016 Posts 3 Reviews 0 Kudos0	how do you remove the juice flow control? I took it apart to clean it but I didn't see how to do that. Working...