Free shipping to the United States when you order $20+

Do anyone know if any of these o rings fit the reload rta clone
Login to post a new topic and to write a reply.
Thread Tools


Search within thread:

Rate This Thread
Login to rate this thread.
#1 (permalink)      5/10/2018 7:57:01 AM US Central   quote/reply + tips
SILENTSTOMP
Guest
  • JoinedMay 2018
  • Posts 11
  • Reviews 0
  • Kudos4
Do anyone know if any of these o rings fit the reload rta clone
Been searching high and low for a o ring for the bottom of the glass to the atty for the Reload rta clone. Was just wondering if anyone has orded these for the Reload rta and had had success?
#2 (permalink)      5/10/2018 8:20:19 AM US Central   quote/reply + tips
SILENTSTOMP
Guest
  • JoinedMay 2018
  • Posts 11
  • Reviews 0
  • Kudos4
@Annie @staff
#3 (permalink)      5/10/2018 8:50:43 AM US Central   quote/reply + tips
Avatar
vitrolles
Verified
  • JoinedMay 2014
  • Posts 2776
  • Reviews 135
  • Kudos4167
+1 details
18/19/20/21/22mm*1.0mm SKU 9648237 better i think
#4 (permalink)      5/10/2018 11:04:39 AM US Central   quote/reply + tips
cory_m
Verified
  • JoinedOct 2016
  • Posts 93
  • Reviews 32
  • Kudos48
+2 details
Here is what I get from measuring the Mojia Reload clone:
(outer diameter x thickness x inner diameter, in mm)
16x2x12 drip tip
6x1x4 tank top cap seal
21x1.5x18 glass lower
18x1x16 glass upper
17x1x15 under build deck
17x1x15 afc ring

vitrolles' suggestion SKU 9648237 gets you most of them, SKU 9648241 would give you options for the oring under the top cap, SKU 9648995 would give you options for the o-ring at the bottom of the glass. I come up with nothing for the drip tip oring, and I say 'options' just in case your clone is slightly different than the Mojia one I have here.
#5 (permalink)      5/10/2018 11:13:45 AM US Central   quote/reply + tips
SILENTSTOMP
Guest
  • JoinedMay 2018
  • Posts 11
  • Reviews 0
  • Kudos4
+3 details
@vitrolles and @cory_m thankyou so much for taking time to reply and coming up with those options.I'll be ordering the last set for the bottom glass shortly. You have just made my day. πŸ˜‡

Edited on 5/10/2018 at 11:17 AM. Reason:
#6 (permalink)      5/10/2018 11:39:59 AM US Central   quote/reply + tips
SILENTSTOMP
Guest
  • JoinedMay 2018
  • Posts 11
  • Reviews 0
  • Kudos4
+1 details
Now looking at them I think vitrolles option looks the best due to the thickness. I've brought assorted x2 256 o rings and the ones that was close were to thick. 1mm sounds right. 1.5mm sounds a bit thick. They are definitely unusual o rings that I've never come across on a rta before. πŸ˜• thanks again guys.😊
#7 (permalink)      5/10/2018 12:05:39 PM US Central   quote/reply + tips
cory_m
Verified
  • JoinedOct 2016
  • Posts 93
  • Reviews 32
  • Kudos48
Whoops, I totally missed that SKU 9648237 doesn't have a 17x1x15 in it, so you'd probably want SKU 9648239 too... and at that point you are up to the cost of a whole new Reload clone.

Most of them are 1mm, except the one where the drip tip goes and the one under the glass at the atomizer base. You could probably get a 1mm that would work under the glass but it might be a pain in the butt to trap it there so it seals - really I think the design of the glass there should have a flat o-ring but I'm not complaining that round ones I can actually get do work.

It looks like SKU 9649002 is actually a 2mm set, might have to get that one myself one day as I have next to nothing for spares for goon style tips. Would be kinda nice if they just had a 'base set' of a few of everything which you could then resupply as needed for the ones you've used.

Keep in mind too, that fasttech usually lists o-rings by (outer diameter x size) where normally o-rings are measured (inner x size).
#8 (permalink)      5/10/2018 12:34:38 PM US Central   quote/reply + tips
SILENTSTOMP
Guest
  • JoinedMay 2018
  • Posts 11
  • Reviews 0
  • Kudos4
I don't mind if it cost the same as another rta to replace the o rings. It's one of the best rta's in my opinion and get on with it really well considering its a clone and having spare loads o rings spare is a plus.
I have plenty of spares for the top cap, top glass and tip, it's just the bottom glass o ring I'm having issue with finding. . And yr the rounded o rings work well but why didn't they just make them flatπŸ˜• .I do find rounded ones wear and tear more easily then the flat ones though. So just to clarify @cory_m , what ones do you suggest I will have better luck with fitting the bottom glass to the base?
#9 (permalink)      5/10/2018 1:02:52 PM US Central   quote/reply + tips
cory_m
Verified
  • JoinedOct 2016
  • Posts 93
  • Reviews 32
  • Kudos48
+1 details
SKU 4625000 or SKU 1088603 work perfectly for the lower glass on these mojia ones (the white o-rings are slightly thicker, thus 1mm smaller but the difference lets the bubble tank seat better too.) I only know mine are mojia because it said it on the bottom of the box it came in, there are kindbright and unbranded ones out there too.

I would still say SKU 9648995 (or SKU 9648994 if you'd prefer silicone), it's a good range around the one I've got and if it winds up being too thick you can do what I do with the white oring, go a size or two smaller so the stretch thins it a little.
#10 (permalink)      5/10/2018 1:34:28 PM US Central   quote/reply + tips
SILENTSTOMP
Guest
  • JoinedMay 2018
  • Posts 11
  • Reviews 0
  • Kudos4
Mine is unbranded but the box it came in was black with reload logo on front like all the others that I've seen, but I know that mean sweet fa. But ill be ordering all of the options on your last post cory_m just to experiment with them and if they work ill also be writing review on here as I know I'm not the only who has struggled with finding them. Thanks again for all your helpπŸ˜‡. I'll let you know how I get on.
#11 (permalink)      12/12/2019 7:29:23 PM US Central   quote/reply + tips
elsa.mae
Verified
  • JoinedJan 2016
  • Posts 52
  • Reviews 2
  • Kudos7
dear cory_m when you measure 6x1x4 tank top cap seal you mean the rings with yellow arrow in the foto? and 16x2x12 drip tip the ring with the green arrow in foto?could these measurements be written mistakenly to different rings?its weird that the drip tip ring is bigger in size than the top cap seal, please elaborate?