[dismiss] FastTech will be on holiday from October 1, 2022 to October 7, 2022. All services resume on October 8, 2022, at 1:00 am (UTC). (details).
Free shipping to the United States when you order $20+

Smooth 510 Pin?
Login to post a new topic and to write a reply.
Thread Tools


Search within thread:

Rate This Thread
Login to rate this thread.
#1 (permalink)      4/1/2017 9:22:09 PM US Central   quote/reply + tips
REBELSCL
Verified
  • JoinedSep 2016
  • Posts 52
  • Reviews 0
  • Kudos12
Smooth 510 Pin?
I intend to use this purely as a squonk RDA. The pin swap should be super simple. In looking at the pictures, the BF Pin is in the accessory group. The standard 510 bottom shown appears to be smooth.. Inside it looks like a BF Pin from the topside picture. ?? If the 510 pin that resides in the atty when shipped is indeed w/o a "head" that allows removal...Sucks to be me....
Something else a bit strange. From the pics/specifications, this atty is obviously a NoName NoPity... the BF-99 is a RDTA. Weird.
Just sayin....
#2 (permalink)      4/1/2017 9:41:46 PM US Central   quote/reply + tips
Randall_H
Verified
  • JoinedOct 2015
  • Posts 5428
  • Reviews 56
  • Kudos7133
It's easy to switch the positive pin with the bf one. And yes, they gave it the wrong name. They did that with NoToy as well - also bf-99.
#3 (permalink)      4/2/2017 3:50:18 AM US Central   quote/reply + tips
Avatar
MotoBlue
Verified
  • JoinedMay 2013
  • Posts 4896
  • Reviews 30
  • Kudos4837
+1 details
If you like this you may also like the NoLegal RDA.

Lots of squonking RDAs to chose from at Squonking at Fasttech

Over a thousand squonk products available at Fasttech
#4 (permalink)      4/2/2017 12:26:06 PM US Central   quote/reply + tips
Avatar
DanTo
Verified
  • JoinedJan 2014
  • Posts 1037
  • Reviews 225
  • Kudos802
NoToy clone (SKU 6463900) had the same pin. The whole "head" is quite long, and the threaded part has just the right length. I don't remember any more, it might had dubious "quality" of the metal on first sight - like it would be too soft - but it wasn't. And besides, you replace it only once (hopefully) and not much can happen to it when it's mounted.


The pin wouldn't stop me from buying this RDA if I wanted it.
#5 (permalink)      4/2/2017 12:41:52 PM US Central   quote/reply + tips
Avatar
MotoBlue
Verified
  • JoinedMay 2013
  • Posts 4896
  • Reviews 30
  • Kudos4837
Just remember not to do it up to tight. It is probably brass and will snap if over tightened
Over a thousand squonk products available at Fasttech
#6 (permalink)      4/15/2017 4:06:22 PM US Central   quote/reply + tips
Avatar
cycoblazer
Verified
  • JoinedJul 2016
  • Posts 287
  • Reviews 503
  • Kudos340
For sure be cautious. The BF pin that comes with this is fragile as crap. I didnt even get to tighten it before it snapped. I threaded it in by hand. It was as soon as I put the allen key on it and started to spin the key between my fingers, it just broke off. Almost like it was over machined way too thin. I have yet to find any other pins that work.
It works pretty good as a RDA but I really bought it to Squonk.
Nothing is forever except change.
#7 (permalink)      4/24/2017 11:02:37 PM US Central   quote/reply + tips
REBELSCL
Verified
  • JoinedSep 2016
  • Posts 52
  • Reviews 0
  • Kudos12
I've received my atomizer and for the life of me I can't figure out
how to remove the smooth 510 pin so that I can install the BF pin.
There is no tooled surface on the pin to enable me to remove it.
Anyone have a solution to this question?
#8 (permalink)      5/7/2017 11:47:08 AM US Central   quote/reply + tips
spiros25
Verified
  • JoinedNov 2015
  • Posts 5
  • Reviews 0
  • Kudos4
I don't have this but from the pictures it looks like the pin can be unscrewd with the allen key rpovided,try it