Free shipping to the United States when you order $20+

Your Favorite Build?
Login to post a new topic and to write a reply.
Thread Tools


Search within thread:

Rate This Thread
Login to rate this thread.
#1 (permalink)      6/7/2017 10:12:01 AM US Central   quote/reply + tips
Avatar
Morris68
Verified
  • JoinedNov 2014
  • Posts 5397
  • Reviews 51
  • Kudos8346
Your Favorite Build?
Just opened mine but before I set it up, I'd really like to hear from those of you who have one and whats worked best for you.
“O wad some Power the giftie gie us, to see oursels as ithers see us!" Robert Burns
#2 (permalink)      6/8/2017 5:47:37 PM US Central   quote/reply + tips
Avatar
xauss
Verified
  • JoinedJun 2016
  • Posts 325
  • Reviews 56
  • Kudos446
+1 details
still got my first build in it

twisted 30*2 twisted again with single 28 guage, 5.5 wraps 2.5mm ID on a mech squonker

i find this atty / build really highlights fruit flavours - especially citric notes

EDIT: Kanthal obv.

Edited on 6/8/2017 at 5:49 PM. Reason:
assume the above is heavy on irony
#3 (permalink)      6/27/2017 4:39:34 AM US Central   quote/reply + tips
plague91
Verified
  • JoinedSep 2013
  • Posts 538
  • Reviews 22
  • Kudos287
+1 details
So far I've been running 8 spaced wraps of 27G kanthal @ 2.5mm diameter, comes out to about 1 ohm. Fits like a glove, heats up instantly and the battery life with an LG HG2 and a pico squeeze is pretty impressive.

It's a simple, solid choice for a MTL build
#4 (permalink)      6/27/2017 6:26:01 AM US Central   quote/reply + tips
Avatar
gph61
Verified
  • JoinedAug 2014
  • Posts 32767
  • Reviews 23
  • Kudos26823
0.75 ohm, spaced, 26 gauge and 2.5mm ID. I forget the wraps. Cotton wrapped around to touching at the back. Air just slightly less than wide open. Also on a Squeeze.

Edit: Kanthal

Edited on 6/27/2017 at 6:27 AM. Reason:
If I'm ignoring you it's because you're fallacy impaired. Here's hoping you rectify your problem so that we might have a sensible conversation.
#5 (permalink)      6/27/2017 6:59:49 AM US Central   quote/reply + tips
Avatar
gph61
Verified
  • JoinedAug 2014
  • Posts 32767
  • Reviews 23
  • Kudos26823
@ plague91, if you can get them try Sanyo NCR18650GA. I've been using them since they first were available. 3500 mah and they don't even get warm to the touch at 0.75 ohms.
If I'm ignoring you it's because you're fallacy impaired. Here's hoping you rectify your problem so that we might have a sensible conversation.
#6 (permalink)      5/30/2018 6:32:24 PM US Central   quote/reply + tips
Avatar
gph61
Verified
  • JoinedAug 2014
  • Posts 32767
  • Reviews 23
  • Kudos26823
I've said this elsewhere before, I should put it here too. The coil needs to be pulled above the trough for wicking it then pushed down into the trough for use. The flavour is better there and you shouldn't melt the inside of the cap, or at least I haven't with my setup I posted above.

Edited on 8/6/2018 at 10:23 AM. Reason:
If I'm ignoring you it's because you're fallacy impaired. Here's hoping you rectify your problem so that we might have a sensible conversation.