Free shipping to the United States when you order $20+
5-pack

non pro?
Login to post a new topic and to write a reply.
Thread Tools


Search within thread:

Rate This Thread
Login to rate this thread.
#1 (permalink)      6/15/2016 8:34:08 AM US Central   quote/reply + tips
mrdjey
Verified
  • JoinedNov 2014
  • Posts 1
  • Reviews 0
  • Kudos0
non pro?
Will these work in the non pro version of the Cubis tank?
#2 (permalink)      6/15/2016 8:46:39 AM US Central   quote/reply + tips
Euphoriaaa
Verified
  • JoinedOct 2014
  • Posts 19
  • Reviews 2
  • Kudos2
Yep.
#3 (permalink)      7/19/2016 1:09:37 AM US Central   quote/reply + tips
Avatar
graemeh
Verified
  • JoinedDec 2013
  • Posts 777
  • Reviews 914
  • Kudos247
so should be ok in the ego AIO .. or maybe not? anybody tried them?
Due to cutbacks, The light at the end of the tunnel Has been turned OFF !
#4 (permalink)      7/19/2016 1:29:35 AM US Central   quote/reply + tips
Avatar
eric1848
Verified
  • JoinedJun 2014
  • Posts 1728
  • Reviews 210
  • Kudos1834
0.25ohm is too low on AIO. it won't fire....
SMPL, eGo AIO and Pico with SS316 coil is my daily combo on 2016. I Quit smoking for years and very enjoying vaping MaxVG now @YVR... Vape safe mate:D
#5 (permalink)      7/20/2016 7:18:27 PM US Central   quote/reply + tips
Avatar
mobit
Verified
  • JoinedNov 2014
  • Posts 250
  • Reviews 5
  • Kudos93
These work with the following tanks / mod

CUBIS TANK
CUBIS PRO TANK
CUBOID MINI TANK
eGRIP II
An anagram of "Fasttech Forum" is "Offers Much Tat"
#6 (permalink)      7/20/2016 9:29:40 PM US Central   quote/reply + tips
Akeilo
Verified
  • JoinedFeb 2015
  • Posts 525
  • Reviews 40
  • Kudos152
mobit wrote:

These work with the following tanks / mod

CUBIS TANK
CUBIS PRO TANK
CUBOID MINI TANK
eGRIP II



are these coils (0.25ohm notch coil) any good in egrip2 - anyone tried?
read a lot about spit back but not sure if its any better/worse with the 0.25 notch coils


Edited on 7/21/2016 at 5:20 AM. Reason:
#7 (permalink)      7/28/2016 11:08:37 AM US Central   quote/reply + tips
Avatar
jackjax
Verified
  • JoinedSep 2014
  • Posts 180
  • Reviews 20
  • Kudos109
+1 details
Akeilo wrote:

are these coils (0.25ohm notch coil) any good in egrip2 - anyone tried?read a lot about spit back but not sure if its any better/worse with the 0.25 notch coils



I use this in the Cubis Pro tank and I only get spit back if I run them at a low wattage. On my Cuboid, they read at 0.27Ω and when setting it to 45W, it works great. Haven't had too much luck using these in TC mode.

Sometimes people don't want to hear the truth because they don't want their illusions destroyed. -Friedrich Nietzsche
#8 (permalink)      7/28/2016 11:25:09 AM US Central   quote/reply + tips
Akeilo
Verified
  • JoinedFeb 2015
  • Posts 525
  • Reviews 40
  • Kudos152
jackjax wrote:

Akeilo wrote:
are these coils (0.25ohm notch coil) any good in egrip2 - anyone tried?read a lot about spit back but not sure if its any better/worse with the 0.25 notch coils

I use this in the Cubis Pro tank and I only get spit back if I run them at a low wattage. On my Cuboid, they read at 0.27Ω and when setting it to 45W, it works great. Haven't had too much luck using these in TC mode.



thanks for the feedback.
I bought the eGrip II, still yet to receive.

I know it comes with the same RBA used and hated by many cubis users.

So Im just wondering if there is any "easy" rebuildable coil for MTL use with eGRIP II

The eGrip 1 with CLR one was great for MTL, and I cant find any good match coils for eGrip II.

Am I the only one looking for such?

#9 (permalink)      7/28/2016 11:48:59 AM US Central   quote/reply + tips
Avatar
jackjax
Verified
  • JoinedSep 2014
  • Posts 180
  • Reviews 20
  • Kudos109
I am using this for DL, although I'm sure MTL would work just fine as the air does not pass directly through the coil. I haven't had to rewick this yet, but from looking at it prior to use, it should be quite simple.
Sometimes people don't want to hear the truth because they don't want their illusions destroyed. -Friedrich Nietzsche
#10 (permalink)      7/31/2016 2:42:57 PM US Central   quote/reply + tips
Avatar
mobit
Verified
  • JoinedNov 2014
  • Posts 250
  • Reviews 5
  • Kudos93
+1 details
Akeilo wrote:

are these coils (0.25ohm notch coil) any good in egrip2 - anyone tried?read a lot about spit back but not sure if its any better/worse with the 0.25 notch coils



They are a little better than the Notch Coils, not as much spitback (but there is some still, especially just after filling). With any of the Joyetech BF coils there is pooling of ejuice during filling, causing spitback.

Your best friend is a cotton bud (Q-Tip). Roll the cotton bud tightly in your fingers (to stop the cotton end coming off in the chimney), and gently push it down the chimney to soak up any pooled ejuice. I always remove the mesh screen from inside the BF coils that have it fitted, and I find it does cut down on some spitback. Another cotton bud method to prevent spitback in the first place, at least for the topfill tanks like the Cubis Pro, is to push a cotton bud down the chimney while you fill the tank, and leave it in as you put the top back on. This blocks the pressure forcing the juice through the cotton and into the chimney (the pressure caused when you screw the top back on).

An anagram of "Fasttech Forum" is "Offers Much Tat"