Thread Tools Rate This Thread
Login to rate this thread.
|
 Nymzavril
Member
- JoinedApr 2014
- Posts
23802
- Reviews
280
- Kudos18276
|
Harto, look - 17mm RTA :-)
Has your name all over it.
Grand Poobah of The Sacred Order of The Magick Blue Screwdriver.
The old Juice Junkies FAQ and guides can be found here: https://www.dropbox.com/sh/vp4ktp8l7fdywg5/AABFkmnUJhjl9vX8tE4URZ8sa?dl=0
|
 mammoth
Member
- JoinedMay 2013
- Posts
421
- Reviews
11
- Kudos439
|
+2
details
these were over $20 a few years ago when i used them. had a couple of these on ego batteries for a good 18 months or so, really good atomisers imo!
|
 YetiVapor
Member
- JoinedApr 2014
- Posts
1430
- Reviews
98
- Kudos1055
|
I never understood why the base was so bloody long on these...
But if you're in the market for a 17mm RTA you don't have many options.
|
 Hartoled
Member
- JoinedSep 2014
- Posts
13576
- Reviews
20
- Kudos10971
|
+3
details
I have one. It's 15mm at the base, unfortunately. Really an odd size.
They also don't sell replacement tanks for them, and the tank hold it all together, so just fabricating one out of an old syringe is less than satisfying.
Thank you, though. I really like the small stuff. I was considering how few mah can actually get me happily through a day with these things.
KF4 Leaking? For a more secure seal, replace the o-ring #16 with one that is 1.5mm cross section. SKU 1536606 or SKU 1536607
|
 rangermsr
Member
- JoinedJun 2013
- Posts
7958
- Reviews
29
- Kudos12023
|
+2
details
Meh, been there done that. They now collect dust as
1) never a true tank replacement
2) performance was meh at best, even when they were setup right. the biggest issue with this type atty - the press fit base was problematic = more meh.
I ended up putting the tank on a 'baby' kayfun ( 17mm ). One of the best setups IMO for this size...until the tank cracked ( subpar PMMA ) = then meh because 'see point 1'. Have since moved on :/
unrealistic expectations lend to disappointment
|
Nymzavril
Member
- JoinedApr 2014
- Posts
23802
- Reviews
280
- Kudos18276
|
+2
details
Sorry, I thought it was worth flagging up in case you didn't check the usually disappointing new arrivals. I always think it's funny that on one hand you like dinky stuff like this, but also have a penchant for 26650. You're strange fruit H, which is one of the many reasons why I like you ;-)
Grand Poobah of The Sacred Order of The Magick Blue Screwdriver.
The old Juice Junkies FAQ and guides can be found here: https://www.dropbox.com/sh/vp4ktp8l7fdywg5/AABFkmnUJhjl9vX8tE4URZ8sa?dl=0
|
Hartoled
Member
- JoinedSep 2014
- Posts
13576
- Reviews
20
- Kudos10971
|
+1
details
I'm really eyeballing those Joyetech CT and VT batteries for mating with the Taifun GS2. If I wasn't pissed at FT right now, I'd order several. The GS2 makes a lot of atties obsolete and the 19mm size is just the right amount of wrong.
KF4 Leaking? For a more secure seal, replace the o-ring #16 with one that is 1.5mm cross section. SKU 1536606 or SKU 1536607
|
 Seamus_
Member
- JoinedMar 2014
- Posts
58
- Reviews
20
- Kudos3
|
Since it is press fitted, it should be able to pull the tiny airflow pipe out right? Plus rightly meassured, to replace the tank with some plexi pipe shouldn't be hard to do as well eh?
Edited on 3/13/2016 at 9:52 AM. Reason: Wer später bremst, ist länger schnell
|