Kanthal A1 wire MTL ohms for dvarw...: FastTech Forums

Thread Tools Rate This Thread Subscribe to this thread Working... Search within thread: Login to rate this thread.
#11 (permalink) 5/8/2019 10:50:15 AM US Central quote/reply + tips
Gatok Member JoinedSep 2018 Posts 366 Reviews 21 Kudos654	+2 details Some coil build recomendation for DL at 15w - 20w with the 2.5mm air insert? Actually i'm using 7 spaced wraps on NI80 26 AWG at 20w but there is a disgusting spit back. Working...
#12 (permalink) 5/8/2019 11:35:16 AM US Central quote/reply + tips
tengeresz56 Member JoinedDec 2014 Posts 460 Reviews 1 Kudos369	+2 details HI Gatok - As I see You use the lite DL AFC 2,5mm in MTL Dvarw for DL usage. The thermal inertia of the 26AWG wires are very big-high = slow heating up. Try to use 30AWG which is much faster. I hope You have good wicking and not too much juice going on. - Another way to add a bit more cotton. Also dependes on the vaping speed. (too slow or too fast) Another way to give a pre heating on 25-30W 1-2 sec. That's what I can suggest You. - We need optimal high heat conductibility which is inpossible with the wide junk battery killer and juice eater wires...- You have to test these possibilites to get te optimal result. Edited on 5/8/2019 at 11:50 AM. Reason: Working...
#13 (permalink) 5/8/2019 12:02:08 PM US Central quote/reply + tips
AlienGrey Member JoinedFeb 2015 Posts 818 Reviews 63 Kudos600	+4 details Gatok wrote: 27 AWG is not easy to get Hmm... How much do you want exactly? :D SKU 4239303 "The Truth Is Out There" Working...
#14 (permalink) 5/8/2019 12:07:07 PM US Central quote/reply + tips
gmm11 Member JoinedMar 2016 Posts 4866 Reviews 187 Kudos5902	+2 details thats my usual one Working...
#15 (permalink) 5/8/2019 12:10:01 PM US Central quote/reply + tips
Gatok Member JoinedSep 2018 Posts 366 Reviews 21 Kudos654	+4 details Thank you my friend. I was thinking just the opposite, let down the gauge to 24 with 5 spaced wraps. 3mm ID. NI80. There's enough air to cool down and NI80 has low ramp up time. The wicking is right. IMO. Working...
#16 (permalink) 5/8/2019 12:15:10 PM US Central quote/reply + tips
Gatok Member JoinedSep 2018 Posts 366 Reviews 21 Kudos654	+2 details AlienGrey wrote: Hmm... How much do you want exactly? :D SKU 4239303 Oh. Working...
#17 (permalink) 5/8/2019 12:36:11 PM US Central quote/reply + tips
tengeresz56 Member JoinedDec 2014 Posts 460 Reviews 1 Kudos369	+4 details Try this or similar to get the juice from the side not from the end of the cotton wick to get less liquid Working...
#18 (permalink) 5/8/2019 12:38:28 PM US Central quote/reply + tips
Gatok Member JoinedSep 2018 Posts 366 Reviews 21 Kudos654	+2 details tengeresz56 wrote: Try this or similar to get the juice from the side not from the end of the cotton wick to get less liquid I'll try it. Thanks. Working...
#19 (permalink) 5/8/2019 12:48:53 PM US Central quote/reply + tips
tengeresz56 Member JoinedDec 2014 Posts 460 Reviews 1 Kudos369	+5 details Lot of vaper were inquiring about the diference between the Version 1 and 2. I just made it for them. Oval hole can be good for DL users (with AFC2-2,5 or without it 3,5) Working...
#20 (permalink) 5/8/2019 1:21:15 PM US Central quote/reply + tips
tengeresz56 Member JoinedDec 2014 Posts 460 Reviews 1 Kudos369	+5 details For those who still use silica wick... ...and for Stuid vapers :-) ...and finaly an idea how to roll the silica into the coil with a simple hook... Easier to understand the photos than write notices :-) Edited on 5/8/2019 at 1:22 PM. Reason: Working...
#21 (permalink) 5/8/2019 2:26:22 PM US Central quote/reply + tips
Troepfler Member JoinedJan 2014 Posts 1058 Reviews 0 Kudos609	+1 details tengeresz56 wrote: For those who still use silica wick......and for Stuid vapers :-)...and finaly an idea how to roll the silica into the coil with a simple hook...Easier to understand the photos than write notices :-) I still use only silica (Ekowool). Are there other users who only use silica? In which atties you are using silica? Working...