shopping cart empty
WORLDWIDE FREE SHIPPING

Extra screws
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#1 (permalink)      12/22/2016 2:27:12 PM US Central   quote/reply + tips
wracky
Member
  • JoinedJan 2015
  • Posts 8
  • Reviews 14
  • Kudos3
Extra screws
Hi! I broke all of screws of base. Need more. Could someone tell SKU of new screws?
SKU of RBA base i know, but i need only the screws.
#2 (permalink)      12/22/2016 5:39:45 PM US Central   quote/reply + tips
Avatar
vapeluvr
Member
  • JoinedJan 2015
  • Posts 4022
  • Reviews 184
  • Kudos2540
+1 details
The screws that FT sells, the heads are just a little too large to fit between the posts on either side of each screw (at least the ones I bought) so you would have to file down the sides of the heads a bit or file back the insides of the posts on each side of the screw.

But if you wanna try for yourself, you need M2X3mm screws SKU 3989104 The tops of the heads are not flat like the ones that come with the RBA, but that doesn't matter. You just need the bottom of the head to be flat in order to properly trap the wire.

The screw on the side that holds the chamber on is 1.4M X 2mm and FT doesn't sell that size. I have read on the forum that this set SKU 4639800 has 1.4MX2.5 and they fit fine, but you have to buy the whole set of screws LOL.

Edited on 12/22/2016 at 6:15 PM. Reason:
Just eat it
#3 (permalink)      12/23/2016 12:00:58 PM US Central   quote/reply + tips
wracky
Member
  • JoinedJan 2015
  • Posts 8
  • Reviews 14
  • Kudos3
+1 details
vapeluvr
Thak you very much!
I will buy SKU 3989104.
#4 (permalink)      12/23/2016 12:36:03 PM US Central   quote/reply + tips
Avatar
vapeluvr
Member
  • JoinedJan 2015
  • Posts 4022
  • Reviews 184
  • Kudos2540
No problem. Also, it would be great if you would come back to this thread after you get your screws and report how the screw heads fit between the posts.

There's always a chance that your screws might have slightly smaller heads than require no filing of the screws or posts.
Just eat it
#5 (permalink)      2/20/2017 2:46:58 AM US Central   quote/reply + tips
wracky
Member
  • JoinedJan 2015
  • Posts 8
  • Reviews 14
  • Kudos3
Hello! Today I received the parcel, immediately put new screws.
So, the screws went almost perfectly. It is good that the head diameter did not exceed the permissible value, since the bell is very close to the posts.
I also ordered SKU 3976800. These screws do not come, because head is too large in diameter.
Thank you very much for the advice vapelyuvr.
1
2