shopping cart empty
WORLDWIDE FREE SHIPPING

Completly fill the Kangertank Subtank mini.
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#1 (permalink)      4/14/2016 11:10:14 PM US Central   quote/reply + tips
Avatar
dedes
Member
  • JoinedAug 2013
  • Posts 187
  • Reviews 11
  • Kudos106
Completly fill the Kangertank Subtank mini.
How to fill the Kangertech Subtank mini to the top without a top fill hole.

This video shows how you can completely fill the Kangertech Sub tank mini ecig tank. To get "more juice" you will need something solid that fits inside the center post. All it takes is to block off the center hole which normally prevents filling the tank any further then the height of the center post. Whatever you use it needs to slide up and down so it can be easily removed while screwing the bottom coil assembly back onto the tank. I used a Dremel mandrel approximately .170 inches(4.33mm) in diameter.
More Juice


Edited on 4/14/2016 at 11:14 PM. Reason:
#2 (permalink)      4/14/2016 11:27:40 PM US Central   quote/reply + tips
Avatar
Vape4more
Member
  • JoinedMay 2015
  • Posts 2806
  • Reviews 113
  • Kudos1814
+2 details
Buy/try one of these Top Fill tanks. They are heaps better and cost only a few dollars

SKU 2699800 = 5ml
SKU 3535801 = 10ml




EDIT: I found just buying the Authentic Kanger base, SKU 2752900, then using it with any of these top fill tanks, is heaps better than the Authentic tanks you could buy.

Edited on 4/14/2016 at 11:33 PM. Reason:
#3 (permalink)      4/14/2016 11:32:08 PM US Central   quote/reply + tips
QcVaper
Member
  • JoinedMay 2014
  • Posts 499
  • Reviews 31
  • Kudos408
I use a q-tip and it works wonders...
And cleans the chimney too...

Edited on 4/14/2016 at 11:32 PM. Reason:
Nothing to see here... Move on...
#4 (permalink)      4/14/2016 11:33:08 PM US Central   quote/reply + tips
Avatar
johnny_469
Member
  • JoinedOct 2013
  • Posts 23118
  • Reviews 288
  • Kudos27277
+2 details
Vape4more wrote:

Buy/try one of these Top Fill tanks. They are heaps better and cost only a few dollars

SKU 2699800 = 5ml
SKU 3535801 = 10ml



I found just buying the Authentic Kanger base, SKU 2752900, then using it with any of these top fill tanks, is heaps better than the Authentic tanks you could buy.






But if you completely fill it, then air has a bit of a hard time making it back into the tank at first, and can give you dry hits :-\


Edited on 4/14/2016 at 11:39 PM. Reason:
Woah, mama!
#5 (permalink)      4/14/2016 11:36:44 PM US Central   quote/reply + tips
QcVaper
Member
  • JoinedMay 2014
  • Posts 499
  • Reviews 31
  • Kudos408
+1 details
Filling mine to the top without dry hits...
50/50 mix...

In fact, I use the q-tip method on every base filling tank I own...

Edited on 4/14/2016 at 11:44 PM. Reason:
Nothing to see here... Move on...
#6 (permalink)      4/14/2016 11:47:42 PM US Central   quote/reply + tips
Avatar
dedes
Member
  • JoinedAug 2013
  • Posts 187
  • Reviews 11
  • Kudos106
Vape4more wrote:

Buy/try one of these Top Fill tanks. They are heaps better and cost only a few dollars SKU 2699800 = 5mlSKU 3535801 = 10ml EDIT: I found just buying the Authentic Kanger base, SKU 2752900, then using it with any of these top fill tanks, is heaps better than the Authentic tanks you could buy.




The Dremel mandrel cost less then 50 cents and it doesn't leak. Not to mention I liked the Subtank mini design so much I own 3 clones with 2 more en route and dozens of colorful washers. Do the top fill tubes use all the same washers?
I do like the idea of a top fill just wish I had started with them.


Edited on 4/14/2016 at 11:51 PM. Reason:
#7 (permalink)      4/14/2016 11:58:13 PM US Central   quote/reply + tips
Avatar
Vape4more
Member
  • JoinedMay 2015
  • Posts 2806
  • Reviews 113
  • Kudos1814
Yep, everything is the same.

EDIT: When buying Vape Gear, we all live and learn.. I don't look at my old mini tank as a waste of money, I look at it as education and a spare glass tube :))

Edited on 4/15/2016 at 12:00 AM. Reason:
#8 (permalink)      4/14/2016 11:59:56 PM US Central   quote/reply + tips
QcVaper
Member
  • JoinedMay 2014
  • Posts 499
  • Reviews 31
  • Kudos408
+1 details
If you use high VG liquid, you don't even need dremel mandrel or q-tip...
Just plug the driptip with a fingertip and fill...
Air in the chimney will act like a plug...
Nothing to see here... Move on...
#9 (permalink)      4/15/2016 12:00:21 AM US Central   quote/reply + tips
Avatar
dedes
Member
  • JoinedAug 2013
  • Posts 187
  • Reviews 11
  • Kudos106
QcVaper wrote:

Filling mine to the top without dry hits...50/50 mix...In fact, I use the q-tip method on every base filling tank I own...



I have only been filling it this way since this morning and haven't had any dry hits yet however the draw does seem a little harder then normal until you get some air into the tank.

#10 (permalink)      4/15/2016 12:07:39 AM US Central   quote/reply + tips
Avatar
waldog
Member
  • JoinedFeb 2016
  • Posts 1105
  • Reviews 52
  • Kudos1585
+1 details
I use a Q-Tip. You might have to remove a bit of the cotton.
"No, you're never too old to Rock'n'Roll if you're too young to die." I.A./J.T.