shopping cart empty
WORLDWIDE FREE SHIPPING

don't get the coil master SKU 2086802. this one has better reviews
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#1 (permalink)      2/26/2015 10:14:32 PM US Central   quote/reply + tips
daviddwp
Member
  • JoinedAug 2014
  • Posts 182
  • Reviews 6
  • Kudos23
don't get the coil master SKU 2086802. this one has better reviews
this one looks better than one I got today. SKU 2086802. don't get that one. it is defective and will not make a coil spent hours looked at YouTube videos I am doing everything right this one is obviously defective I would buy this set up the screws look a lot better
#2 (permalink)      2/27/2015 3:28:21 AM US Central   quote/reply + tips
Cloud86
Member
  • JoinedJul 2013
  • Posts 23
  • Reviews 4
  • Kudos4
Did you get the blue set? because for some reason only the reviews for the blue coil master are negative. I'm still waiting for my red set to be delivered, hoping that the threading won't be too horrible as some reviews suggest.

Edited on 2/27/2015 at 8:40 PM. Reason: I'm dumb
#3 (permalink)      2/27/2015 7:33:12 PM US Central   quote/reply + tips
daviddwp
Member
  • JoinedAug 2014
  • Posts 182
  • Reviews 6
  • Kudos23
yes I got the blue set
#4 (permalink)      3/4/2015 7:10:58 AM US Central   quote/reply + tips
Cloud86
Member
  • JoinedJul 2013
  • Posts 23
  • Reviews 4
  • Kudos4
+1 details
Ok I finally received my red coil master and I 'm pleased to confirm that my set is not defective as I feared after reading the reviews for the blue set. I tried it right away with different wires and had no problems at all winding them.
In my opnion this thing performs much better than the kuro coiler with thinner wires (32 awg) as it doesn't require god-like dexterity and luck to handle; thicker wires work well too however you need more strength to wind them than when using a kuro coiler due to the coil master's smaller diameter. The only real cons I found in my set are the holes in the 1 and 1.5 mm bases: they are not deep enough to accommodate the full length of their poles and it is thus impossible to fit them properly in the box. below are some pics of my first coils (28 awg a1, 32 awg nichrome and 0.46 mm) and a comparison with the kuro coiler. I'm very satisfied with the product and for the price I can't possible complain about the construction quality or the middle cap's threading , which are both more than decent in my opinion. Also, no red screwdriver...

Pictures

Edited on 3/4/2015 at 7:13 AM. Reason:
#5 (permalink)      3/4/2015 7:28:49 AM US Central   quote/reply + tips
Avatar
TheLoneVaper
Member
  • JoinedOct 2014
  • Posts 2283
  • Reviews 0
  • Kudos1739

In my opnion this thing performs much better than the kuro coiler with thinner wires (32 awg) as it doesn't require god-like dexterity and luck to handle; thicker wires work well too however you need more strength to wind them than when using a kuro coiler due to the coil master's smaller diameter.



couldn't agree more on this :)

#6 (permalink)      3/4/2015 7:41:45 PM US Central   quote/reply + tips
daviddwp
Member
  • JoinedAug 2014
  • Posts 182
  • Reviews 6
  • Kudos23
Cloud86 wrote:

Ok I finally received my red coil master and I 'm pleased to confirm that my set is not defective as I feared after reading the reviews for the blue set. I tried it right away with different wires and had no problems at all winding them. In my opnion this thing performs much better than the kuro coiler with thinner wires (32 awg) as it doesn't require god-like dexterity and luck to handle; thicker wires work well too however you need more strength to wind them than when using a kuro coiler due to the coil master's smaller diameter. The only real cons I found in my set are the holes in the 1 and 1.5 mm bases: they are not deep enough to accommodate the full length of their poles and it is thus impossible to fit them properly in the box. below are some pics of my first coils (28 awg a1, 32 awg nichrome and 0.46 mm) and a comparison with the kuro coiler. I'm very satisfied with the product and for the price I can't possible complain about the construction quality or the middle cap's threading , which are both more than decent in my opinion. Also, no red screwdriver...Pictures

.. nice I am glad to hear that yours works. I don't understand why there is a big difference in the red one . go figure. red is in.. glad it works..