shopping cart empty
WORLDWIDE FREE SHIPPING
5-pack

don't work on Aspire K1
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#1 (permalink)      4/14/2015 10:30:23 AM US Central   quote/reply + tips
Avatar
Westie
Member
  • JoinedMar 2014
  • Posts 111
  • Reviews 2
  • Kudos37
don't work on Aspire K1
Anyone got these to work on the Authentic Aspire K1 BVC Clearomizer SKU 1930805
The specifications listed on this site state these should work with the Authentic Aspire K1 BVC Clearomizer but they don't.
#2 (permalink)      4/14/2015 11:43:19 AM US Central   quote/reply + tips
Avatar
AlienGrey
Member
  • JoinedFeb 2015
  • Posts 763
  • Reviews 59
  • Kudos549
They should work with an Aspire K1 Glassomizer. I've got the authentic Aspire BVC 1.6 Ohm coils that I'm using with my Aspire K1 Glasoomizer. I'm using the 1.6 Ohm coils with a 650mAh or 1300mAh eGo battery. The performance is much better than with the 1.8 Ohm coils.

I didn't buy them from FT but if they're authentic it shouldn't be a problem to use them with your Aspire K1 Glassomizer.

What exactly do you mean when you say that they don't work?

Edited on 4/14/2015 at 11:43 AM. Reason:
"The Truth Is Out There"
#3 (permalink)      4/14/2015 12:02:03 PM US Central   quote/reply + tips
Avatar
dawso_s
Member
  • JoinedMar 2014
  • Posts 266
  • Reviews 73
  • Kudos114
These are a standard fit for the K1.
I'm not crazy, the voices tell me so!
#4 (permalink)      4/14/2015 12:56:50 PM US Central   quote/reply + tips
wason92
Member
  • JoinedJan 2015
  • Posts 1087
  • Reviews 1
  • Kudos437
Why don't they work?
murder polis three stairs up the wummin in the middle door hut me wae a cup ma heeds aw broken ma face is aw cut murder polis three stairs up
#5 (permalink)      4/14/2015 1:36:29 PM US Central   quote/reply + tips
Avatar
Westie
Member
  • JoinedMar 2014
  • Posts 111
  • Reviews 2
  • Kudos37
My mods says no atomizer and no resistance is measured on my ohm meter. With the coil that came with the K1 it does work.

Edited on 4/14/2015 at 1:42 PM. Reason:
#6 (permalink)      4/14/2015 1:38:48 PM US Central   quote/reply + tips
wason92
Member
  • JoinedJan 2015
  • Posts 1087
  • Reviews 1
  • Kudos437
The coil in b the vk1 i got for my mother is identical to every other small bvc I've seen.
Maybe yours are just fucked
murder polis three stairs up the wummin in the middle door hut me wae a cup ma heeds aw broken ma face is aw cut murder polis three stairs up
#7 (permalink)      4/14/2015 2:22:10 PM US Central   quote/reply + tips
Avatar
AlienGrey
Member
  • JoinedFeb 2015
  • Posts 763
  • Reviews 59
  • Kudos549
Maybe the coil doesn't make good contact because of machine oil on it. Try with cleaning it.
"The Truth Is Out There"
#8 (permalink)      4/14/2015 3:22:58 PM US Central   quote/reply + tips
Avatar
fleksie
Member
  • JoinedJul 2014
  • Posts 159
  • Reviews 76
  • Kudos256
Try taking out the positive pin of the coil a little bit.
#9 (permalink)      4/14/2015 3:26:53 PM US Central   quote/reply + tips
Avatar
zentrucker
Member
  • JoinedAug 2014
  • Posts 937
  • Reviews 154
  • Kudos590
Sometimes these come shorted in the package, might want to look at the pin area and check for a snip of wire hanging out, and trim it.
Peace be with you ...
#10 (permalink)      4/14/2015 3:55:01 PM US Central   quote/reply + tips
Avatar
Westie
Member
  • JoinedMar 2014
  • Posts 111
  • Reviews 2
  • Kudos37
@fleksie: tried that, also changed out the positive pin with the coil that works but still doesn't work.

@zentrucker: did what you suggested and trimmed down the wire sticking out but still no luck.

These coils look only slightly different from the one that came with the K1 but none of the 5 coils in this pack will work.

Edited on 4/14/2015 at 3:56 PM. Reason:
#11 (permalink)      4/14/2015 4:01:33 PM US Central   quote/reply + tips
Avatar
fleksie
Member
  • JoinedJul 2014
  • Posts 159
  • Reviews 76
  • Kudos256
Hmm ok I don't know, I ordered a few months ago some packs and had no troubles with them.
Is there a scratch code so you can check authenticity?