shopping cart empty
[dismiss] Kung Hei Fat Choy. FastTech will be on holiday from January 20, 2020, to January 31, 2020. Shipping and support will resume normal service on February 1, 2020. (details)
WORLDWIDE FREE SHIPPING

Looking for a rebuildable atomizer to use with this mod
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#1 (permalink)      11/17/2013 5:34:53 PM US Central   quote/reply + tips
comced
Member
  • JoinedOct 2013
  • Posts 40
  • Reviews 0
  • Kudos1
Looking for a rebuildable atomizer to use with this mod
I recently purchased this mod, and now im looking for a rebuildable atomizer that doesnt have problems, is easy to rebuild (first time rebuilding), and is cheap. Can anyone help me out?
#2 (permalink)      11/17/2013 11:11:27 PM US Central   quote/reply + tips
Avatar
enrico
Member
  • JoinedMay 2013
  • Posts 1067
  • Reviews 240
  • Kudos513
Maby the Scar rba atomizer can look pretty well :)
Vaping is NOT Smoking!!!
#3 (permalink)      11/18/2013 6:09:22 PM US Central   quote/reply + tips
comced
Member
  • JoinedOct 2013
  • Posts 40
  • Reviews 0
  • Kudos1
Is there anything else thats cheaper? I wanna get one of those attys that i see in videos where people get tons of clouds
#4 (permalink)      11/21/2013 2:11:26 PM US Central   quote/reply + tips
Avatar
rangermsr
Member
  • JoinedJun 2013
  • Posts 7889
  • Reviews 29
  • Kudos11826
+2 details
I have the v6 rda from here. It's looks good on this mod. It works good for me too. It's not the cheapest (7 bux n change) but its better design IMO. I just use a single coil, and nothing below a 1.8 ohm. 14500 batteries just can't handle the stress of sub ohming. It could blow up on you, so be careful. Most all those people blowing clouds are using 18xxx size mods, and sub-ohms (below 1 ohm)

The v6 air hole is a little high, but one can make it work easy by making sure the wick in lined up to the air hole (longer legs to the coil) No modding necessary. This is actually a plus for me as it allows more drips in the cup without drowning the wick
unrealistic expectations lend to disappointment
#5 (permalink)      11/22/2013 11:33:55 AM US Central   quote/reply + tips
comced
Member
  • JoinedOct 2013
  • Posts 40
  • Reviews 0
  • Kudos1
Darn. I bought myself an igo-w dripper and i was planning to sub ohm with this
#6 (permalink)      11/22/2013 7:26:44 PM US Central   quote/reply + tips
Avatar
rangermsr
Member
  • JoinedJun 2013
  • Posts 7889
  • Reviews 29
  • Kudos11826
Sorry about that combed. You just need to get a 18xxx mod, you'll be good to go (and safe) :)
unrealistic expectations lend to disappointment
#7 (permalink)      11/22/2013 9:40:04 PM US Central   quote/reply + tips
comced
Member
  • JoinedOct 2013
  • Posts 40
  • Reviews 0
  • Kudos1
I got myself the v3 clone. Hoping it gets shipped fast
#8 (permalink)      11/23/2013 9:11:39 PM US Central   quote/reply + tips
ChaosAffect
Member
  • JoinedJul 2013
  • Posts 431
  • Reviews 86
  • Kudos434
Ummm... It comes with a matching RDA. A pretty good one, too.
#9 (permalink)      11/24/2013 4:25:58 AM US Central   quote/reply + tips
Avatar
Wylie
Member
  • JoinedMay 2013
  • Posts 5116
  • Reviews 76
  • Kudos3339
+1 details
Try a round tooth pick with five wraps of .06 kanthal ribbon and thread a little piece of cotton through the coil once attached to the drippers screws. This works very well with mine.
Always keep your ear to the ground!
#10 (permalink)      11/24/2013 4:28:30 AM US Central   quote/reply + tips
Avatar
Wylie
Member
  • JoinedMay 2013
  • Posts 5116
  • Reviews 76
  • Kudos3339
Only do the build I mentioned if using IMR batteries, forgot to mention this. the coil should come out a little above 1 ohm.
Always keep your ear to the ground!
#11 (permalink)      11/24/2013 9:12:56 AM US Central   quote/reply + tips
comced
Member
  • JoinedOct 2013
  • Posts 40
  • Reviews 0
  • Kudos1
Hey wylie! Im gonna be using aw imr batteries