shopping cart empty
WORLDWIDE FREE SHIPPING

Small gap trying to push top cap down to base...?
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#1 (permalink)      2/17/2014 11:32:22 PM US Central   quote/reply + tips
vaporoni1
Member
  • JoinedJul 2013
  • Posts 760
  • Reviews 51
  • Kudos180
Small gap trying to push top cap down to base...?
Anyone else have a small gap when trying to push the top cap down all the way to sit flush with its base? There is ~1mm gap from the top cap to the base on mine.
#2 (permalink)      2/21/2014 9:11:42 AM US Central   quote/reply + tips
Avatar
JpKrHk
Member
  • JoinedNov 2013
  • Posts 13780
  • Reviews 7
  • Kudos43517
+1 details
There was 0.5mm gap from the top to the base on my SKU 1553601 & SKU 1601200. I replaced the bottom seal with a small rubber band, and lightly sanded the base, so I have no gap. This is probably a problem of series. On a total of 4 SKU 1553601 purchased, only one had this problem.

Although I do not speak the same product, I hope this helps you.

;)
#3 (permalink)      3/18/2014 7:33:30 PM US Central   quote/reply + tips
h0y0ung
Member
  • JoinedAug 2013
  • Posts 52
  • Reviews 44
  • Kudos16
This is a very simple issue to fix. You don't have to modify anything!

I simply push mine straight down with the hole little offset to the coil, and twist the cap while pushing down to align it to the coil.

Mine has 0 gap every time.